標題: Photo-Fenton pretreatment of carbofuran - Analyses via experimental design, detoxification and biodegradability enhancement
作者: Lu, Li-An
Ma, Ying-Shih
Kumar, Mathava
Lin, Jih-Gaw
環境工程研究所
Institute of Environmental Engineering
關鍵字: Biodegradability;Carbofuran;Central composite design;Microtox (R) test;Response surface methodology
公開日期: 10-十月-2011
摘要: The central composite design (CCD) and response surface methodology (RSM) were employed to evaluate the effect of H(2)O(2) dosage rate (1-10 mg L(-1) min(-1)) and Fe(3+) dosage (1-100 mg L(-1)) in the photo-Fenton treatment of carbofuran and to develop the second-order polynomial equations in terms of carbofuran and dissolved organic carbon (DOC) removals and BOD(5)/DOC ratio with different reaction times. Both H(2)O(2) dosage rate and Fe(3+) dosage have significant effects on the dependable variables. Based on the results of carbofuran removal and BOD(5)/DOC ratio, H(2)O(2) dosage rate of 5.4 mg L(-1) min(-1) and Fe(3+) dosage of 59 mg L(-1) were found to be the favorable reagent dosages for carbofuran degradation. Under these conditions, the toxicity unit measured by Microtox(R) test with 5 min exposure was decreased from 47 to 6 and the biodegradability evaluated by BOD(5)/COD ratio was increased from 0 to 0.76 after 60 min reaction. The results obtained in this study demonstrate that the photo-Fenton process is a promising pretreatment before the application of biological treatment for carbofuran removal from contaminated water/wastewater. (C) 2011 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.seppur.2011.07.040
http://hdl.handle.net/11536/14740
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2011.07.040
期刊: SEPARATION AND PURIFICATION TECHNOLOGY
Volume: 81
Issue: 3
起始頁: 325
結束頁: 331
顯示於類別:期刊論文


文件中的檔案:

  1. 000296003200009.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。