Full metadata record
DC FieldValueLanguage
dc.contributor.authorLiang, Jia-Mingen_US
dc.contributor.authorChang, Po-Yenen_US
dc.contributor.authorChen, Jen-Jeeen_US
dc.date.accessioned2019-04-02T06:00:15Z-
dc.date.available2019-04-02T06:00:15Z-
dc.date.issued2019-01-01en_US
dc.identifier.issn1574-1192en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.pmcj.2018.11.002en_US
dc.identifier.urihttp://hdl.handle.net/11536/148771-
dc.description.abstractMachine-to-machine (M2M) communication is one of the key technologies to realize Internet of Things (IoT). Since IoT applications are mainly for smart sensing, such as metering, home surveillance, disaster detection, and e-health, their special sensing/uploading behaviors will result in periodic and/or event-driven small data transmissions, which may potentially decrease the radio resource efficiency. On the other hand, due to the frequent communication nature of sensing data for IoT applications, the power consumption is increasing dramatically. To reduce the power consumption of IoT devices, the 3rd Generation Partnership Project (3GPP) has defined the discontinuous reception/discontinuous transmission (DRX/DTX) mechanism to allow devices to turn off their radio interfaces and go to sleep in various patterns. However, how to optimize the DRX/DTX scheduling while improving the resource efficiency is still an open issue. In this paper, we investigate an uplink resource allocation problem over long-term evolution machine-to-machine (LTE-M) networks, which is standardized by 3GPP to improve performance on IoT. In this network, we consider the periodic, event-driven, and query-based IoT traffic while minimizing the devices' power consumption. We prove this problem to be NP-complete and propose an aggregation-efficient DRX/DTX scheduling (AEDS) scheme. This scheme takes advantage of both spatial and temporal data aggregation while applying DRX/DTX for energy saving. Specifically, the scheme consists of three phases. The first phase exploits long-term static scheduling for periodic data to ensure the latency and data rate while minimizing the devices' wake-up time. The second phase tries to decrease devices' power consumption through precisely determining their DRX/DTX configurations. Finally, the third phase employs short-term dynamic scheduling for event-driven and query-based data to improve transmission efficiency. Therefore, both small data and power consumption problems are relieved. Extensive simulation results show that the proposed scheme can improve resource efficiency, enlarge network capacity while reducing power consumption compared to the existing schemes. (C) 2018 Elsevier B.V. All rights reserved.en_US
dc.language.isoen_USen_US
dc.subjectInternet of Things (IoT)en_US
dc.subjectDiscontinuous reception/discontinuous transmission (DRX/DTX)en_US
dc.subjectLTE-Men_US
dc.subjectMachine-to-machine communication (M2M)en_US
dc.subjectMassive connectivityen_US
dc.subjectPower savingen_US
dc.subjectResource allocationen_US
dc.subjectSmall dataen_US
dc.titleEnergy-efficient scheduling scheme with spatial and temporal aggregation for small and massive transmissions in LTE-M networksen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.pmcj.2018.11.002en_US
dc.identifier.journalPERVASIVE AND MOBILE COMPUTINGen_US
dc.citation.volume52en_US
dc.citation.spage29en_US
dc.citation.epage45en_US
dc.contributor.department資訊工程學系zh_TW
dc.contributor.departmentDepartment of Computer Scienceen_US
dc.identifier.wosnumberWOS:000456823600004en_US
dc.citation.woscount0en_US
Appears in Collections:Articles