完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChen, Yi-Tsenen_US
dc.contributor.authorKarthik, Manien_US
dc.contributor.authorBai, Hsunlingen_US
dc.date.accessioned2019-04-02T06:00:14Z-
dc.date.available2019-04-02T06:00:14Z-
dc.date.issued2009-06-01en_US
dc.identifier.issn0733-9372en_US
dc.identifier.urihttp://dx.doi.org/10.1061/(ASCE)EE.1943-7870.0000005en_US
dc.identifier.urihttp://hdl.handle.net/11536/149785-
dc.description.abstractThe modification of CaO sorbent with organic alumina precursor to enhance the sorption capacity during cyclic capture is demonstrated in this study. The results indicate that during the 10 min sorption time for each cycle, the CO2 sorption capacity of original CaO sorbent is significantly decreased from 0.27 to 0.19 and 0.12 g CO2/g sorbent after 5 and 60 cycles, respectively. On the other hand, the organic alumina modified CaO has a fresh capacity of 0.22 g CO2/g sorbent, it increases to 0.24 g CO2/g sorbent after 5 cycles, and then decreases to around 0.15 g CO2/g sorbent after 60 cycles. When increasing the sorption time to 60 min at the 66th cycle, the sorption capacity of original CaO is 0.2, whereas it is 0.26 g CO2/g sorbent for organic alumina modified CaO. The results demonstrate that by adding only 5% by weight of Ca12Al14O33 species into the CaO sorbent, the CO2 sorption capacity can be enhanced up to similar to 27% by weight.en_US
dc.language.isoen_USen_US
dc.titleModification of CaO by Organic Alumina Precursor for Enhancing Cyclic Capture of CO2 Greenhouse Gasen_US
dc.typeArticleen_US
dc.identifier.doi10.1061/(ASCE)EE.1943-7870.0000005en_US
dc.identifier.journalJOURNAL OF ENVIRONMENTAL ENGINEERING-ASCEen_US
dc.citation.volume135en_US
dc.citation.spage459en_US
dc.citation.epage464en_US
dc.contributor.department環境工程研究所zh_TW
dc.contributor.departmentInstitute of Environmental Engineeringen_US
dc.identifier.wosnumberWOS:000266201700012en_US
dc.citation.woscount4en_US
顯示於類別:期刊論文