完整後設資料紀錄
DC 欄位語言
dc.contributor.authorLiao, Hung-Chouen_US
dc.contributor.authorLin, Chin-Chingen_US
dc.contributor.authorChen, Yu-Weien_US
dc.contributor.authorLiu, Ta-Chungen_US
dc.contributor.authorChen, San-Yuanen_US
dc.date.accessioned2019-04-02T05:58:08Z-
dc.date.available2019-04-02T05:58:08Z-
dc.date.issued2010-01-01en_US
dc.identifier.issn0959-9428en_US
dc.identifier.urihttp://dx.doi.org/10.1039/c0jm00385aen_US
dc.identifier.urihttp://hdl.handle.net/11536/149972-
dc.description.abstractHybrid CdS/P3HT photovoltaic devices using F-doped SnO2 (FTO)-coated ZnO nanorod arrays as electrodes were studied in this work. The crystalline FTO, made using low-cost spray pyrolysis deposition (SPD), displayed a nominally complete and uniform coating over the entire outer surface of the ZnO nanorods. The photovoltaic performance of the CdS/P3HT photovoltaic devices increased with the FTO-coated ZnO nanorod length and thickness of the FTO layer, due to improvement in collecting photogenerated electrons, which results in the increased short circuit current density (J(SC)) and fill factor (FF) of the devices. The incorporation of CdS into the P3HT greatly enhanced the JSC of the devices with a nanorod FTO electrode. The power conversion efficiency (PCE) of the device with a ZnO nanorod length of 320 nm was increased from 0.37% for P3HT without CdS to 1.8% with CdS of AR = 1 (spherical shape). With a further increase of the AR of the CdS nanocrystal to 4, the PCE was further increased up to 2.6%. However, longer CdS nanocrystals conversely caused deterioration in PCE as a result of the nanorod array morphology. These results indicate that, although increased nanorod length could improve the photocurrent and efficiency, other factors, such as P3HT infiltration, nanorod array morphology and CdS nanocrystal length are required for obtaining the optimal performance of these devices.en_US
dc.language.isoen_USen_US
dc.titleImprovement in photovoltaic performance for hybrid P3HT/elongated CdS nanocrystals solar cells with F-doped SnO2 arraysen_US
dc.typeArticleen_US
dc.identifier.doi10.1039/c0jm00385aen_US
dc.identifier.journalJOURNAL OF MATERIALS CHEMISTRYen_US
dc.citation.volume20en_US
dc.citation.spage5429en_US
dc.citation.epage5435en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000279046200008en_US
dc.citation.woscount15en_US
顯示於類別:期刊論文