完整後設資料紀錄
DC 欄位語言
dc.contributor.authorTseng, YHen_US
dc.contributor.authorChiou, BSen_US
dc.contributor.authorPeng, CCen_US
dc.contributor.authorOzawa, Len_US
dc.date.accessioned2019-04-02T05:59:33Z-
dc.date.available2019-04-02T05:59:33Z-
dc.date.issued1998-09-30en_US
dc.identifier.issn0040-6090en_US
dc.identifier.urihttp://dx.doi.org/10.1016/S0040-6090(98)00549-5en_US
dc.identifier.urihttp://hdl.handle.net/11536/150459-
dc.description.abstractThe effects of Eu on the spectral properties of Y2O2S have been investigated. The Y2O2S:Eu phosphor powders were prepared with a flux fusion method and electrophoretically deposited on an ITO-coated glass substrate to form a thin layer. Both cathodoluminescence and photoluminescence emission spectra of Y2O2S:Eu were measured. The highly intense emission lines at 616 and 626 nm are attributed to the transition from D-5(0) to F-7(2) levels. The color of Y2O2S:Eu phosphor varies from orange to red as the Eu concentration increases from Eu/ Y = 0.025 (molar ratio) to 0.06. The luminescence decay times are shorter than 1.1 ms for Eu concentrations ranging from 0.025 to 0.06 (Eu/ Y molar ratio). The luminescent color becomes redder but less bright as the Eu concentration is increased. (C) 1998 Elsevier Science S.A. All rights reserved.en_US
dc.language.isoen_USen_US
dc.subjectphosphoren_US
dc.subjectY2O2S : Euen_US
dc.subjectluminescenceen_US
dc.titleSpectral properties of Eu3+-activated yttrium oxysulfide red phosphoren_US
dc.typeArticleen_US
dc.identifier.doi10.1016/S0040-6090(98)00549-5en_US
dc.identifier.journalTHIN SOLID FILMSen_US
dc.citation.volume330en_US
dc.citation.spage173en_US
dc.citation.epage177en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.department光電工程研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.contributor.departmentInstitute of EO Enginerringen_US
dc.identifier.wosnumberWOS:000076490700021en_US
dc.citation.woscount38en_US
顯示於類別:期刊論文