Full metadata record
DC FieldValueLanguage
dc.contributor.authorYang, Yao-Yien_US
dc.contributor.authorHsieh, Chun-Yuen_US
dc.contributor.authorHuang, Tzu-Chien_US
dc.contributor.authorLee, Yu-Hueien_US
dc.contributor.authorWang, Shih-Weien_US
dc.contributor.authorFan, Ming-Yanen_US
dc.contributor.authorDu, Ming-Jheen_US
dc.contributor.authorCheng, Shih-Hsienen_US
dc.contributor.authorChen, Ke-Horngen_US
dc.date.accessioned2014-12-08T15:21:21Z-
dc.date.available2014-12-08T15:21:21Z-
dc.date.issued2011en_US
dc.identifier.isbn978-1-4244-9474-3en_US
dc.identifier.issn0271-4302en_US
dc.identifier.urihttp://hdl.handle.net/11536/15169-
dc.description.abstractThe Avalanche Photodiodes (APDs) are widely used in a variety of optical application requiring high sensitivity, such as long-distance optical communication and optical distance measurement, because the APDs can detect the low level light. APDs accompanied with the Transimpedance Amplifier (TIA) are utilized on the receiver side in the communication system. The trend of integrating the active optical components faces the challenge of integrating different voltage levels. In general, the operation voltage of TIA is usually 1.8 V or 3.3 V. However, the APD requires a high reverse-biasing voltage of 40 V - 80 V. Therefore, a high conversation-ratio boost converter must be included to provide the high voltage to bias the APD. Besides, output voltage ripple must be minimized to decrease the influence on communication signals. Experimental results show the 80 V output voltage boosted from the input voltage of 2.5 V. The output voltage ripple is 2 mV under the condition of 1 mA load current.en_US
dc.language.isoen_USen_US
dc.titleA 80V Output Voltage Boost Converter with Low Voltage Ripple for Avalanche Photodiode(APD)en_US
dc.typeProceedings Paperen_US
dc.identifier.journal2011 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS (ISCAS)en_US
dc.citation.spage757en_US
dc.citation.epage760en_US
dc.contributor.department電控工程研究所zh_TW
dc.contributor.departmentInstitute of Electrical and Control Engineeringen_US
dc.identifier.wosnumberWOS:000297265300185-
Appears in Collections:Conferences Paper