標題: | High-performance graphene-based heaters fabricated using maskless ultraviolet laser patterning |
作者: | Tseng, Shih-Feng Cheng, Pi-Ying Hsiao, Wen-Tse Chen, Ming-Fu Chung, Chien-Kai Wang, Po-Han 機械工程學系 Department of Mechanical Engineering |
關鍵字: | Graphene-based film heater;Net-like electrode;Ultraviolet laser;Infrared thermal imaging camera;Electric heating |
公開日期: | 1-六月-2019 |
摘要: | Graphene-based film heaters (GFHs) with laser-patterned electrode structures can be used in microheaters, thermal sensors, and thermostatic apparatuses for various high-value-added medical devices and creative products. To obtain uniform and higher temperatures, this study aims to design, fabricate, and measure GFHs with net-like electrode structures using ANSYS Workbench software, an ultraviolet laser processing system, and an infrared thermal imaging camera, respectively. The electric heating experiments (which were measured with an infrared thermal imaging camera) demonstrated that the temperatures of GFHs with net-like electrode structures were significantly higher than those of devices without patterned graphene films. Moreover, the temperatures of GFHs with net-like electrode structures increased rapidly with time when DC voltages higher than 12V were applied for at least 10s. A maximum temperature of 91.5 degrees C was obtained at 200s when a DC voltage of 18V was applied. Besides, minimal and maximal deviations of steady-state temperatures between experimental and simulated values were 6.9 degrees C and 10 degrees C under each corresponding DC voltage, respectively. |
URI: | http://dx.doi.org/10.1007/s00170-019-03426-6 http://hdl.handle.net/11536/152187 |
ISSN: | 0268-3768 |
DOI: | 10.1007/s00170-019-03426-6 |
期刊: | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
Volume: | 102 |
Issue: | 9-12 |
起始頁: | 3011 |
結束頁: | 3020 |
顯示於類別: | 期刊論文 |