Full metadata record
DC FieldValueLanguage
dc.contributor.authorKao, Yu-Chenen_US
dc.contributor.authorChen, Chun-Huaen_US
dc.contributor.authorWhang, Wha-Tzongen_US
dc.contributor.authorChen, Yi-Chunen_US
dc.contributor.authorChen, Kai-Chien_US
dc.date.accessioned2019-08-02T02:18:28Z-
dc.date.available2019-08-02T02:18:28Z-
dc.date.issued2019-07-01en_US
dc.identifier.issn0959-8103en_US
dc.identifier.urihttp://dx.doi.org/10.1002/pi.5818en_US
dc.identifier.urihttp://hdl.handle.net/11536/152294-
dc.description.abstractA facile synthesis concept focusing on the poly(vinyl alcohol) (PVA) concentration induced interfacial energy effects in seed swelling polymerization was realized for the successful fabrication of a series of monodispersed poly(methyl methacrylate) (PMMA) microparticles with four crosslinking agents, 2,2-bis[(methacryloyloxy)methyl]butyl methacrylate, 1,2-ethanediyl bis(2-methylacrylate), 1,3-divinylbenzene and 1,2-ethanediyl diacetate. We revealed a special role of PVA in regulating the diffusion of crosslinking agents as well as the swelling degree of latex seeds and, more noticeably, the consequent improved mechanical properties of the crosslinked PMMA microparticles formed. The highest recovery rate obtained from the PMMA microparticles with 0.6 wt% PVA approached 67%, which is higher than or comparable to reported values. This work not only developed a new facile synthesis approach for producing highly uniform tough crosslinked PMMA microparticles for more potential applications but also provided valuable insights into fundamental aspects of seed swelling polymerization. (c) 2019 Society of Chemical Industryen_US
dc.language.isoen_USen_US
dc.subjectpoly(vinyl alcohol)en_US
dc.subjectconcentrationen_US
dc.subjectmechanical propertiesen_US
dc.subjectseed swelling polymerizationen_US
dc.subjectcrosslinking agenten_US
dc.titlePoly(vinyl alcohol)-controlled synthesis of monodispersed crosslinked poly(methyl methacrylate) microparticles with significantly improved mechanical propertiesen_US
dc.typeArticleen_US
dc.identifier.doi10.1002/pi.5818en_US
dc.identifier.journalPOLYMER INTERNATIONALen_US
dc.citation.volume68en_US
dc.citation.issue7en_US
dc.citation.spage1315en_US
dc.citation.epage1321en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000470904600011en_US
dc.citation.woscount0en_US
Appears in Collections:Articles