完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Phuoc-Anh Le | en_US |
dc.contributor.author | Van-Truong Nguyen | en_US |
dc.contributor.author | Yen, Po-Jen | en_US |
dc.contributor.author | Tseng, Tseung-Yuen | en_US |
dc.contributor.author | Wei, Kung-Hwa | en_US |
dc.date.accessioned | 2019-08-02T02:18:35Z | - |
dc.date.available | 2019-08-02T02:18:35Z | - |
dc.date.issued | 2019-06-01 | en_US |
dc.identifier.issn | 2398-4902 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1039/c9se00011a | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/152380 | - |
dc.description.abstract | We reported a new and environmentally friendly phloroglucinol additive incorporated polyvinyl alcohol-LiClO4 gel polymer electrolyte for flexible symmetrical solid-state supercapacitors. The incorporation of 10 wt% phloroglucinol into PVA-LiClO4 gel polymer electrolytes results in much higher specific capacitance (114 F g(-1)) than that without phloroglucinol (60 F g(-1)), an increase of 90%, because of the redox reaction of phloroglucinol in the system. We used the PVA-LiClO4 with 10 wt% phloroglucinol as a gel polymer electrolyte in combination with nitrogen-doped graphene nanosheet-based electrodes as the anode and cathode to fabricate a symmetrical solid-state supercapacitor. The fabricated supercapacitor involving the phloroglucinol redox additive has an energy density of 2.3 W h kg(-1) at a power density of 150 W kg(-1), which is higher than the one without a redox additive (1.9 W h kg(-1) at a power density of 150 W kg(-1)). Moreover, the supercapacitor involving the redox additive has good stability; its capacitance remains at up to similar to 94% after 5000 charge/discharge cycles. | en_US |
dc.language.iso | en_US | en_US |
dc.title | A new redox phloroglucinol additive incorporated gel polymer electrolyte for flexible symmetrical solid-state supercapacitors | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1039/c9se00011a | en_US |
dc.identifier.journal | SUSTAINABLE ENERGY & FUELS | en_US |
dc.citation.volume | 3 | en_US |
dc.citation.issue | 6 | en_US |
dc.citation.spage | 1536 | en_US |
dc.citation.epage | 1544 | en_US |
dc.contributor.department | 交大名義發表 | zh_TW |
dc.contributor.department | 材料科學與工程學系 | zh_TW |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | National Chiao Tung University | en_US |
dc.contributor.department | Department of Materials Science and Engineering | en_US |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.identifier.wosnumber | WOS:000469258600016 | en_US |
dc.citation.woscount | 0 | en_US |
顯示於類別: | 期刊論文 |