A ripple-based adaptive on-time controlled buck converter with slope balance technique

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2019-12-01

類型

期刊名稱

ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING

卷期與頁次

第 101 卷第 3 期,頁 543–553

ISSN

0925-1030

語言

英文

摘要

A ripple-based adaptive on-time controlled buck converter with slope balance technique is presented in this paper. The slope balance technique provides a fixed switching frequency. A 4-bit single-slope analog-to-digital converter (ADC) was used to fix switching frequency when power supply was from 3.3 to 4.5 V. The slope balance technique is proposed to achieve an adaptive on-time control and without extra clock-controlled circuits and current sensing circuits. The input voltage can be predicted from the adaptive on-time by using 4-bit single-slope ADC control. Measurement results show that switching frequency is 1.448 and 1.438 MHz when load current is 200 and 1000 mA, respectively. The proposed buck converter was fabricated in 0.35 mu m CMOS technology with a supply voltage of 4.5 V. The output voltage was measured to be 1.2 V and the load current range was determined to range 200-1000 mA.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Su, C.-C., & Hung, C.-C. (2019). A ripple-based adaptive on-time controlled buck converter with slope balance technique. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 101(3), 543–553. https://doi.org/10.1007/s10470-019-01471-5

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153398