Heat transfer enhancement of wavy fin-and-tube heat exchangers via innovative compound designs
檔案
本條目沒有附加檔案。
日期
2020-03-01
類型
系所
期刊名稱
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
卷期與頁次
第 149 卷
ISSN
1290-0729
語言
英文
摘要
The present study examines some novel improvements in association with the airside performance of wavy fin-and-tube heat exchangers. Effects of waffle height, adding slits on wavy fins and vortex generators on the thermal resistance of wavy fin-and-tube heat exchangers are investigated. Increasing waffle height, imposing slits on the wavy fin, or adding vortex generators can provide 6-10% reduction in thermal resistance subject to constraints of the same pumping power. Yet, the compound design including all these three features together is even more powerful to achieve a 16% reduction of thermal resistance. Increasing waffle height will decrease thermal resistance, but the accompanied pressure drop is even higher. Hence, it is highly recommended that the waffle height should be less than the fin pitch or at a corrugation angle being less than 15 degrees. Punching slits on the top of wavy fin surface can result in 6-7% decrease in thermal resistance. Effect of increasing the width of slits on heat transfer characteristics is negligible. Conversely, increasing the length of slits is much more effective. It can be seen from the results that slits with a length of 12 mm and a width of 1 mm yield 8-10% reduction in thermal resistance.
關鍵詞
Heat transfer enhancementWavy fin-and-tube heat exchangerWaffle heightVortex generatorsCompound designNumerical simulation網址
所屬典藏
期刊論文引用此條目
Sadeghianjahromi, A., Kheradmand, S., Nemati, H., & Wang, C.-C. (2020). Heat transfer enhancement of wavy fin-and-tube heat exchangers via innovative compound designs. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 149, 0. https://doi.org/10.1016/j.ijthermalsci.2019.106211
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153484