完整後設資料紀錄
DC 欄位語言
dc.contributor.authorWu, Ming-Jhangen_US
dc.contributor.authorWen, Hua-Chiangen_US
dc.contributor.authorWu, Shyh-Chien_US
dc.contributor.authorYang, Ping-Fengen_US
dc.contributor.authorLai, Yi-Shaoen_US
dc.contributor.authorHsu, Wen-Kuangen_US
dc.contributor.authorWu, Wen-Faen_US
dc.contributor.authorChou, Chang-Pinen_US
dc.date.accessioned2014-12-08T15:21:38Z-
dc.date.available2014-12-08T15:21:38Z-
dc.date.issued2011-12-01en_US
dc.identifier.issn0026-2714en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.microrel.2011.06.063en_US
dc.identifier.urihttp://hdl.handle.net/11536/15373-
dc.description.abstractIn this study, the SiGe epilayers were created on silicon substrate by using ultra-high vacuum chemical vapor deposition (UHV/CVD) and followed by annealing procedures. The frictional behaviors of SiGe epilayers were subjected to nanoscratch techniques under a ramping load. Damage caused by scratching was examined by atomic force microscopy (AFM); the results showed that the pile-up phenomena were significant on both sides of the scratch in the case of SiGe epilayers, suggesting that the dynamic deformation behavior was dominated by cracking as ploughing occurred during scratching. In addition, the SiGe epilayers films with different annealed conditions exhibited the decrease in coefficient of friction (COF), indicating the higher shear resistance exist in annealed SiGe epilayers, which probably affect the film uniformity and device yield under IC process integration. (C) 2011 Elsevier Ltd. All rights reserved.en_US
dc.language.isoen_USen_US
dc.titleEvaluating nanotribological behavior of annealing Si(0.8)Ge(0.2)/Si filmsen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.microrel.2011.06.063en_US
dc.identifier.journalMICROELECTRONICS RELIABILITYen_US
dc.citation.volume51en_US
dc.citation.issue12en_US
dc.citation.spage2223en_US
dc.citation.epage2227en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
顯示於類別:期刊論文