完整後設資料紀錄
DC 欄位語言
dc.contributor.authorYuen, Terry Y. P.en_US
dc.contributor.authorTsai, Cheng-Anen_US
dc.contributor.authorDeb, Trissaen_US
dc.contributor.authorLin, Yu-Hsiangen_US
dc.contributor.authorNyienyi, Juneen_US
dc.contributor.authorWan, Kai Taien_US
dc.contributor.authorHuang, Qunxianen_US
dc.date.accessioned2020-03-02T03:23:32Z-
dc.date.available2020-03-02T03:23:32Z-
dc.date.issued2020-01-01en_US
dc.identifier.urihttp://dx.doi.org/10.3390/s20010195en_US
dc.identifier.urihttp://hdl.handle.net/11536/153799-
dc.description.abstractRapid identification of structural damage positions is essential to the post-disaster rehabilitation of structures and infrastructures. Large shear deformation, e.g., shear failure of bridge piers, shear-slip of slopes, and shear cracking of structural walls, is often the cause of structural instability. Distributed optical fibre sensing (DOFS) techniques have an advantage over point-based sensors in terms of spatial continuous structural condition monitoring. This paper presents the development of new measurement theory and algorithm to evaluate the structural shear deflection based on the large beam deflection and optical bend loss theories. The proposed technique adopted a photon-counting Optical Time Domain Reflectometer (nu-OTDR) with polymer optical fibres (POFs) which has a large deformation measurement range and high spatial resolution. In the experiment, shear deformation events can be successfully detected and evaluated from the proposed technique. When the normalised shear deformation is larger than 0.2, both the event locations and the magnitudes can be accurately determined. When normalised shear deformation is lesser than 0.2, the error in the magnitude evaluation increased, but the event location can be found with an absolute error <0.5 m. Multiple shear events can be treated as independent events when they are separated by more than 5 m. Various configurations of POFs attached to concrete beam specimens for rupture failure monitoring were also studied. The configuration that could maximise the POF curvature at the beam failure produced the largest nu-OTDR signals. In other configurations in which the POFs were only stretched at failure, the signals were less strong and were influenced by the POF-structure bonding strength.en_US
dc.language.isoen_USen_US
dc.subjectdistributed OFSen_US
dc.subjectbend lossen_US
dc.subjectlarge shear deformationen_US
dc.subjectfailure monitoringen_US
dc.subjectPOFen_US
dc.subjectnu-OTDRen_US
dc.titleLarge Structural Shear Deformation and Failure Monitoring Using Bend Losses in Polymer Optical Fibreen_US
dc.typeArticleen_US
dc.identifier.doi10.3390/s20010195en_US
dc.identifier.journalSENSORSen_US
dc.citation.volume20en_US
dc.citation.issue1en_US
dc.citation.spage0en_US
dc.citation.epage0en_US
dc.contributor.department土木工程學系zh_TW
dc.contributor.departmentDepartment of Civil Engineeringen_US
dc.identifier.wosnumberWOS:000510493100195en_US
dc.citation.woscount0en_US
顯示於類別:期刊論文