標題: Facile and One-Step in Situ Synthesis of Pure Phase Mesoporous Li2MnSiO4/CNTs Nanocomposite for Hybrid Supercapacitors
作者: Kumar, Nagesh
Singh, Meetesh
Kumar, Amit
Tseng, Tseung-Yuen
Sharma, Yogesh
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
關鍵字: supercapacitor;hybrid system;specific surface area;energy density;power density
公開日期: 23-三月-2020
摘要: In material sciences, synergistic effect and nanostructuring are the two factors which enable researchers to look beyond the conventionally defined categories of the materials. Here, we report the synthesis mechanism of pure phase mesoporous Li2MnSiO4 (LMS) with a high specific surface area by varying the concentration of metal precursors and solvents in one-step hydrothermal technique. Furthermore, the effect of MWCNTs addition on the electrochemical performance of LMS is studied. The quantitative contribution of current generating from EDLC and/or the surface pseudocapacitance reactions, and the current caused by diffusion-controlled redox reactions in the total current is also evaluated. The pure phase LMS/CNTs nanocomposite with 2% MWCNTs (abbreviated as LMS2C) is found to be the best supercapacitor material among studied nanocomposites as it exhibits specific capacitance of similar to 290 F g(-1) @ 1 A g(-1), good rate capability, small relaxation time constant (tau = 87 ms), and higher diffusion coefficient of electrolytic cations (D-k(+) = 9.4 x 10(-9) cm(2) s(-1)) in 2 M KOH aqueous electrolyte. A hybrid supercapacitor cell (HSC) designed using LMS2C as positive and activated carbon as negative electrodes shows the maximum energy density of 31 W h kg(-1), which is much higher than several recently reported hybrid supercapacitor systems. Two series connected HSCs can power a drone motor and light up 8 red LEDs for more than 3 min, indicating practical applicability of our designed hybrid supercapacitor system.
URI: http://dx.doi.org/10.1021/acsaem.9b02118
http://hdl.handle.net/11536/154394
ISSN: 2574-0962
DOI: 10.1021/acsaem.9b02118
期刊: ACS APPLIED ENERGY MATERIALS
Volume: 3
Issue: 3
起始頁: 2450
結束頁: 2464
顯示於類別:期刊論文