完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChang, Kai-Pingen_US
dc.contributor.authorLin, Po-Jungen_US
dc.contributor.authorHorng, Ray-Huaen_US
dc.contributor.authorWuu, Dong-Singen_US
dc.date.accessioned2020-10-05T02:02:02Z-
dc.date.available2020-10-05T02:02:02Z-
dc.date.issued2020-11-15en_US
dc.identifier.issn1369-8001en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.mssp.2020.105228en_US
dc.identifier.urihttp://hdl.handle.net/11536/155453-
dc.description.abstractThe growth characteristics of Fe-doped GaN epitaxial layers on semi-insulating SiC (001) substrates were studied using metalorganic chemical vapor deposition for high breakdown voltage device applications. A smooth Fe-doped GaN epilayer surface can be realized by changing the ferrocene flow, while higher Fe concentrations in the GaN epilayer affect the surface morphology. To reduce the Fe trapping carrier and the sheet resistances of the two-dimension electron gas generated from the interface of AlGaN and GaN, the thickness ratio of Fe-doped and undoped GaN bi-epilayers was also optimized. AlGaN/GaN high electron mobility transistors with the optimum doping concentration of Fe-doped GaN and suitable thickness of undoped GaN have been successfully developed. The achieved breakdown voltage of the Fe-doped GaN epitaxial layer can be as high as 2457 V, which is attributed to the Fe-doped GaN epitaxial layer with higher resistance, which can sustain the high breakdown voltage. The details of the correlation between the surface morphology, Fe concentration, and thickness of Fe-doped GaN epitaxial layers used for high breakdown voltage devices will be also discussed in this paper.en_US
dc.language.isoen_USen_US
dc.subjectFe-doped GaNen_US
dc.subjectSemi-insulating SiCen_US
dc.subjectSurface morphologyen_US
dc.subjectSegregationen_US
dc.subjectMetalorganic chemical vapor depositionen_US
dc.subjectTwo-dimension electron gasen_US
dc.titleGrowth characteristics of Fe-doped GaN epilayers on SiC (001) substrates and their effects on high breakdown voltage devicesen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.mssp.2020.105228en_US
dc.identifier.journalMATERIALS SCIENCE IN SEMICONDUCTOR PROCESSINGen_US
dc.citation.volume119en_US
dc.citation.spage0en_US
dc.citation.epage0en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:000562679400006en_US
dc.citation.woscount0en_US
顯示於類別:期刊論文