完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Tsui, YY | en_US |
dc.contributor.author | Wang, CK | en_US |
dc.date.accessioned | 2014-12-08T15:03:04Z | - |
dc.date.available | 2014-12-08T15:03:04Z | - |
dc.date.issued | 1995-12-01 | en_US |
dc.identifier.issn | 0098-2202 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/1645 | - |
dc.description.abstract | This study is concerned with numerical analysis of laminar separated flow in symmetric, two-dimensional, straight-walled diffusers. With Reynolds numbers Re = 56 and 114 and expansion ratios ER = 3 and 4, totally, there are four cases considered. At the low Reynolds number and the low expansion reaction the flow in the diffuser is nearly symmetric to the center line, irrespective of the diffusion angle. As Reynolds number or expansion ratio increases, a large recirculation region forms at one side wall and a small one at the other side. For the case with Re = 114 and ER = 4 the small recirculating flow disappears at small diffusion angles and a third recirculating flow appear in the same side of the small main recirculation region for large diffusion angles. The pressure recovery reaches its peak value somewhere downstream of the reattachment point of the large recirculating flow. The effectiveness of the diffuser deteriorates as the diffusion angle increases, apart from that at Re = 56 the effectiveness increases from theta = 15 to 30 deg. Symmetric flow solutions can be obtained by incorporating a symmetric relaxation method. The pressure recovery is higher for the symmetric flow than that for the asymmetric flow owing to the weaker recirculating strength in the former. | en_US |
dc.language.iso | en_US | en_US |
dc.title | Calculation of laminar separated flow in symmetric two dimensional diffusers | en_US |
dc.type | Article | en_US |
dc.identifier.journal | JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME | en_US |
dc.citation.volume | 117 | en_US |
dc.citation.issue | 4 | en_US |
dc.citation.spage | 612 | en_US |
dc.citation.epage | 616 | en_US |
dc.contributor.department | 交大名義發表 | zh_TW |
dc.contributor.department | 機械工程學系 | zh_TW |
dc.contributor.department | National Chiao Tung University | en_US |
dc.contributor.department | Department of Mechanical Engineering | en_US |
dc.identifier.wosnumber | WOS:A1995TY06900013 | - |
dc.citation.woscount | 23 | - |
顯示於類別: | 期刊論文 |