Fabrication and Verification of a Small-Form-Factor Blue-Light Optical Pickup Head With Holographic Optical Element

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	Lin, Yue-Jheng	en_US
dc.contributor.author	Chiu, Yi	en_US
dc.contributor.author	Shih, Hsi-Fu	en_US
dc.contributor.author	Chiou, Jin-Chern	en_US
dc.date.accessioned	2014-12-08T15:23:44Z	-
dc.date.available	2014-12-08T15:23:44Z	-
dc.date.issued	2012-01-01	en_US
dc.identifier.issn	0733-8724	en_US
dc.identifier.uri	http://hdl.handle.net/11536/16559	-
dc.description.abstract	A small-form-factor (SFF) blue-light optical pickup head (OPH) with holographic optical element (HOE) has been fabricated and assembled. The assembly and alignment of various components in the pickup head were facilitated by using a flip chip bonder. Experimental results indicated that the focusing error signal (FES) of the assembled OPH with the wavelength of 405 nm could be successfully detected. The linear range of the FES was about than 4 m. The gauge repeatability and reproducibility (GR&R) of the assembly process was tested and found to be acceptable.	en_US
dc.language.iso	en_US	en_US
dc.subject	Blu-ray	en_US
dc.subject	gauge repeatability and reproducibility (GR&R)	en_US
dc.subject	holographic optical element	en_US
dc.subject	optical pickup head	en_US
dc.subject	small-form-factor (SFF)	en_US
dc.subject	virtual image method	en_US
dc.title	Fabrication and Verification of a Small-Form-Factor Blue-Light Optical Pickup Head With Holographic Optical Element	en_US
dc.type	Article	en_US
dc.identifier.journal	JOURNAL OF LIGHTWAVE TECHNOLOGY	en_US
dc.citation.volume	30	en_US
dc.citation.issue	1	en_US
dc.citation.epage	38	en_US
dc.contributor.department	電機工程學系	zh_TW
dc.contributor.department	Department of Electrical and Computer Engineering	en_US
dc.identifier.wosnumber	WOS:000305962800002	-
dc.citation.woscount	2	-
顯示於類別：	期刊論文

文件中的檔案：

000305962800002.pdf

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。