標題: SOLID PARTICLE COLLECTION CHARACTERISTICS ON IMPACTION SURFACES OF DIFFERENT DESIGNS
作者: TSAI, CJ
CHENG, YH
交大名義發表
環境工程研究所
National Chiao Tung University
Institute of Environmental Engineering
公開日期: 1-七月-1995
摘要: The effect of solid particle loading on the collection efficiency of a single-stage impactor with different impaction surface designs has been investigated. Experimental results show that the time-varying collection efficiency depends on the surface coating rendition, thickness of particle deposit, and impaction surface design. Deposited particles change the surface condition such that the particle collection efficiency decreases with time for the coated impaction surface while it increases with time for the uncoated impaction surface. However, after heavy loading, the collection efficiency eventually approaches nearly the same asymptotic value whether the impaction surface is coated or not. The impaction surface with an inverted conical cavity and an orifice plate alleviates particle bounce and reentrainment problems during particle collection process, resulting in a much greater collection efficiency than the conventional design, which uses flat impaction surface.
URI: http://hdl.handle.net/11536/1828
ISSN: 0278-6826
期刊: AEROSOL SCIENCE AND TECHNOLOGY
Volume: 23
Issue: 1
起始頁: 96
結束頁: 106
顯示於類別:期刊論文


文件中的檔案:

  1. A1995RG28000008.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。