完整後設資料紀錄
DC 欄位語言
dc.contributor.authorTSAIH, WCen_US
dc.contributor.authorHUANG, CKen_US
dc.contributor.authorTSENG, TYen_US
dc.date.accessioned2014-12-08T15:03:17Z-
dc.date.available2014-12-08T15:03:17Z-
dc.date.issued1995-07-01en_US
dc.identifier.issn0002-7820en_US
dc.identifier.urihttp://hdl.handle.net/11536/1839-
dc.description.abstractEpitaxial CeO2 films on (1 $($) over bar$$ 102) sapphire and (100) MgO were grown by rf magnetron sputtering, Substrate temperature, total pressure, and oxygen-to-argon mole ratio were varied to explore the optimal deposition condition. The X-ray diffraction spectra indicate that the degree of crystallinity of the deposited CeO2 films depends on the oxygen-to-argon mole ratio and the substrate temperature, Atomic force microscopy images of the films on sapphire and MgO showed that substrate temperature and total pressure affect surface roughness. The best him surface is smooth with a 0.89 nm root-mean-square roughness, The quality of the films on MgO showed a strong dependence on substrate pretreatments, Epitaxial CeO2 films could be grown on preannealed or pre-etched MgO if substrate temperatures reached higher than 790 degrees C, Additionally, the effect of ion bombardment at low total pressures on the crystallinity of the films was examined by growing the films outside the plasma region, Experimental results indicate that the ion bombardment does not prevent the films from preferred orientation.en_US
dc.language.isoen_USen_US
dc.titleGROWTH OF CEO2 FILMS ON SAPPHIRE AND MGO BY RF MAGNETRON SPUTTERINGen_US
dc.typeNoteen_US
dc.identifier.journalJOURNAL OF THE AMERICAN CERAMIC SOCIETYen_US
dc.citation.volume78en_US
dc.citation.issue7en_US
dc.citation.spage1969en_US
dc.citation.epage1973en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:A1995RJ68000041-
dc.citation.woscount10-
顯示於類別:期刊論文