標題: Sliding-mode direct torque control of an induction motor
作者: Lin, SK
Fang, CH
電控工程研究所
Institute of Electrical and Control Engineering
關鍵字: induction motor;direct torque control (DTC);sliding mode control;MRAC
公開日期: 2001
摘要: This paper proposes new sliding-mode direct torque control (DTC) for an induction motor. This DTC is established by designing two sliding surfaces for the torque and the flux. We propose a novel sliding surface for the torque, which is based on the integral-sliding surface, whereas the sliding surface for the flux follows that of Benchaib et al. [16]. We also modify the flux observer of Benchaib and Edwards [17] by the adaptive sliding-mode method. This not only eliminates the estimation of the uncertainty bounds, but also improves the performance of sliding control. A practical application of the proposed DTC to the position control of a motor is also presented. Some experiments verify the control theory and demonstrate the usefulness of the proposed DTC.
URI: http://hdl.handle.net/11536/18990
ISBN: 0-7803-7108-9
ISSN: 1553-572X
期刊: IECON'01: 27TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3
起始頁: 2171
結束頁: 2177
Appears in Collections:Conferences Paper