Full metadata record
DC FieldValueLanguage
dc.contributor.authorJyang, JYen_US
dc.contributor.authorTzou, YYen_US
dc.date.accessioned2014-12-08T15:27:18Z-
dc.date.available2014-12-08T15:27:18Z-
dc.date.issued1998en_US
dc.identifier.isbn0-7803-4489-8en_US
dc.identifier.issn0275-9306en_US
dc.identifier.urihttp://hdl.handle.net/11536/19556-
dc.description.abstractThis paper presents the design and implementation of a vector control IC using complex programmable logic device (CPLD). A vector oriented control structure using integer arithmetic has been developed for the voltage or current regulation of 3-phase PWM inverters. This vector control IC can he used for the voltage or current control of a 3-phase PWM inverter using a vector command with specified amplitude, frequency, and phase. It has four operation modes: voltage or current control in either stationary or synchronous reference frame. This vector control IC is designed as a co-processor for a general-purpose microcontroller used for sc motor control and 3-phase power supplies. This vector control IC is realized with a 10-bit data bus and employs about 40 thousands logic gates of a CPLD (FLEX 10K 100) from Altera eo. The sampling rate can be programmed up to 50 kHz. Simulation and experimental results are given to illustrate the performance of the designed vector control IC.en_US
dc.language.isoen_USen_US
dc.titleA CPLD-based voltage/current vector controller for 3-phase PWM invertersen_US
dc.typeProceedings Paperen_US
dc.identifier.journalPESC 98 RECORD - 29TH ANNUAL IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1 AND 2en_US
dc.citation.spage262en_US
dc.citation.epage268en_US
dc.contributor.department電控工程研究所zh_TW
dc.contributor.departmentInstitute of Electrical and Control Engineeringen_US
dc.identifier.wosnumberWOS:000077614400039-
Appears in Collections:Conferences Paper