Influence of the GaN capping thickness on the strain and photoluminescence properties of InN/GaN quantum dots

檔案

日期

2013-02-01

類型

期刊名稱

THIN SOLID FILMS

卷期與頁次

第 529 卷,頁 111–114

ISSN

0040-6090

語言

英文

摘要

InN quantum dots (QDs) were grown on 1 mu m thick GaN/(0001) sapphire substrates by low pressure metal organic chemical vapor deposition. A single crystalline 10-nm thick GaN capping layer was achieved on the InN QDs by the flow-rate modulation epitaxy method at 650 degrees C. The (002) omega/2 theta scans of the X-ray diffraction measurements show that the reduction of the lattice constant with a capping thickness indicate that the GaN capping process exerts a compressive strain on the InN QDs. The residual strain was reduced from 0.245% to -0.245% as the GaN cap thickness increases from 0 to 20 nm. In addition, the analysis of the photoluminescence peak energy estimated that the free electron concentration (i.e. density of indium (In) vacancy) decreased from 1.62x10(18) cm(-3) to 1.24x10(18) cm(-3). The suggestion here is that the increase of the compressive strain on InN QDs due to the increased GaN capping layer thickness provides the high driving force for the interdiffusion of the In atom and gallium (Ga) atoms between the interface of InN QDs and the GaN capping layer. Thus, we believe that more Ga atoms can diffuse from the GaN capping layer and substitute the high density of In vacancy in the InN QDs, resulting in a decrease of the free electron concentration in the InN QDs with the increase in the GaN capping layer thickness. (C) 2012 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Ke, W.-C., Wu, Y.-H., Houng, W.-C., & Wei, C.-A. (2013). Influence of the GaN capping thickness on the strain and photoluminescence properties of InN/GaN quantum dots. THIN SOLID FILMS, 529, 111–114. https://doi.org/10.1016/j.tsf.2012.05.040

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21449