完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Ho, Yen-Teng | en_US |
dc.contributor.author | Chang, Kuo-Shu | en_US |
dc.contributor.author | Liu, Kou-Chen | en_US |
dc.contributor.author | Hsieh, Li-Zen | en_US |
dc.contributor.author | Liang, Mei-Hui | en_US |
dc.date.accessioned | 2014-12-08T15:30:39Z | - |
dc.date.available | 2014-12-08T15:30:39Z | - |
dc.date.issued | 2013-05-01 | en_US |
dc.identifier.issn | 0232-1300 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1002/crat.201300002 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/21889 | - |
dc.description.abstract | The room temperature epitaxial growth of CeO2 on lattice matched (001) LaAlO3 substrates by using pulsed laser deposition (PLD) method under various oxygen partial pressure (Po-2) is demonstrated. X-ray diffraction analysis with 2-Theta/rocking curve/Phi-scan, cross-sectional transmission electron microscopy with selected-area diffractions are used to characterize structural of grown films. The epitaxial (001) CeO2 can be achieved at room temperature under Po-2 less than 2 x 10(-3) Torr. The best quality of grown film is obtained under Po-2 = 2 x 10(-5) Torr and degraded under Po-2 = 2 x 10(-6) Torr due to oxygen deficiency in structure. The epitaxial relationship between CeO2 and LAO is confirmed to be (001)CeO2 //(001)LAO, [100](CeO2)//[110](LAO) and [010](CeO2)//[(1)over-bar10](LAO). No obvious reduction reaction occurred, from Ce+4 turned into Ce+3 states, as reducing oxygen partial pressure during growth by PLD. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | CeO2 | en_US |
dc.subject | room temperature epitaxy | en_US |
dc.subject | PLD | en_US |
dc.subject | LAO | en_US |
dc.subject | XPS | en_US |
dc.title | Room temperature epitaxial growth of (001) CeO2 on (001) LaAlO3 by pulsed laser deposition | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1002/crat.201300002 | en_US |
dc.identifier.journal | CRYSTAL RESEARCH AND TECHNOLOGY | en_US |
dc.citation.volume | 48 | en_US |
dc.citation.issue | 5 | en_US |
dc.citation.spage | 308 | en_US |
dc.citation.epage | 313 | en_US |
dc.contributor.department | 材料科學與工程學系 | zh_TW |
dc.contributor.department | Department of Materials Science and Engineering | en_US |
dc.identifier.wosnumber | WOS:000319141300006 | - |
dc.citation.woscount | 4 | - |
顯示於類別: | 期刊論文 |