Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Fuh, Chur-Shyang | en_US |
dc.contributor.author | Liu, Po-Tsun | en_US |
dc.contributor.author | Chou, Yi-Teh | en_US |
dc.contributor.author | Teng, Li-Feng | en_US |
dc.contributor.author | Sze, S. M. | en_US |
dc.date.accessioned | 2014-12-08T15:31:45Z | - |
dc.date.available | 2014-12-08T15:31:45Z | - |
dc.date.issued | 2013 | en_US |
dc.identifier.issn | 2162-8769 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/22461 | - |
dc.identifier.uri | http://dx.doi.org/10.1149/2.012301jss | en_US |
dc.description.abstract | The role of oxygen in amorphous InGaZnO thin film transistor (a-IGZO TFT) is studied for the device ambient stability. The threshold voltage (Vth) value of 350 degrees C annealed a-IGZO TFT decreased apparently with the staying duration, and the average value shifted from 10.2 V to 5.8 V after a 9-day staying at the atmosphere. After raising the annealing temperature to 450 degrees C, the electrical stability issue was improved significantly with superior electrical parameters, including low threshold voltage (V-th), low subthreshold swing, high carrier mobility and a small V-th variation of +/- 0.5 V. It can be attributed to the enhancement of bonding energy of oxygen in the thermally-annealed a-IGZO film with the increase of thermal annealing temperatures. Besides, the stronger oxygen bonding could also suppress the absorption/desorption and UV-induced migration at the back surface, causing better electrical reliability and immunity against UV radiation, respectively. All these results showed the ambient stability is greatly related to the oxygen in a-IGZO film, and the desired electrical characteristic can be achieved via the optimization of thermal annealing process. (C) 2012 The Electrochemical Society. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.title | Role of Oxygen in Amorphous In-Ga-Zn-O Thin Film Transistor for Ambient Stability | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1149/2.012301jss | en_US |
dc.identifier.journal | ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY | en_US |
dc.citation.volume | 2 | en_US |
dc.citation.issue | 1 | en_US |
dc.citation.spage | Q1 | en_US |
dc.citation.epage | Q5 | en_US |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | 光電工程學系 | zh_TW |
dc.contributor.department | 顯示科技研究所 | zh_TW |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department | Department of Photonics | en_US |
dc.contributor.department | Institute of Display | en_US |
dc.identifier.wosnumber | WOS:000319450800020 | - |
dc.citation.woscount | 4 | - |
Appears in Collections: | Articles |
Files in This Item:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.