The influence of different magnitudes and methods of applying preload on fusion and disc replacement constructs in the lumbar spine: a finite element analysis
檔案
- 000324612300004.pdf (557.0 KB, Adobe PDF)
日期
2013-09-01
類型
系所
期刊名稱
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
卷期與頁次
第 16 卷第 9 期,頁 943–953
ISSN
1025-5842
語言
英文
摘要
In a finite element (FE) analysis of the lumbar spine, different preload application methods that are used in biomechanical studies may yield diverging results. To investigate how the biomechanical behaviour of a spinal implant is affected by the method of applying the preload, hybrid-controlled FE analysis was used to evaluate the biomechanical behaviour of the lumbar spine under different preload application methods. The FE models of anterior lumbar interbody fusion (ALIF) and artificial disc replacement (ADR) were tested under three different loading conditions: a 150N pressure preload (PP) and 150 and 400N follower loads (FLs). This study analysed the resulting range of motion (ROM), facet contact force (FCF), inlay contact pressure (ICP) and stress distribution of adjacent discs. The FE results indicated that the ROM of both surgical constructs was related to the preload application method and magnitude; differences in the ROM were within 7% for the ALIF model and 32% for the ADR model. Following the application of the FL and after increasing the FL magnitude, the FCF of the ADR model gradually increased, reaching 45% at the implanted level in torsion. The maximum ICP gradually decreased by 34.1% in torsion and 28.4% in lateral bending. This study concluded that the preload magnitude and application method affect the biomechanical behaviour of the lumbar spine. For the ADR, remarkable alteration was observed while increasing the FL magnitude, particularly in the ROM, FCF and ICP. However, for the ALIF, PP and FL methods had no remarkable alteration in terms of ROM and adjacent disc stress.
所屬典藏
期刊論文引用此條目
Zhong, Z.-C., Hung, C., Lin, H.-M., Wang, Y.-H., Huang, C.-H., & Chen, C.-S. (2013). The influence of different magnitudes and methods of applying preload on fusion and disc replacement constructs in the lumbar spine: a finite element analysis. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 16(9), 943–953. https://doi.org/10.1080/10255842.2011.645226
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23037