標題: Design of a Hybrid Light Guiding Plate With High Luminance for Backlight System Application
作者: Pan, Jui-Wen
Hu, Ya-Wen
光電系統研究所
生醫電子轉譯研究中心
Institute of Photonic System
Biomedical Electronics Translational Research Center
關鍵字: Illumination design;light-emitting diodes (LEDs);micro-optics;microstructure fabrication;optical systems design
公開日期: 1-Dec-2013
摘要: We proposed a novel backlight system, which consisted of a hybrid light guide plate (LGP) and one diffuser sheet. The hybrid LGP contains a flat plate without any microstructures and one layer of optically patterned film (OPF). Comparing with the conventional edge-lit backlight system, the on-axis luminance could be improved to 6.1 x by using the novel backlight system and the half-luminance angle decreased from 21 deg to 10 deg in vertical direction, and decreased from 21 deg to 6 deg in horizontal direction. At the same time, this design also achieved a uniformity of illumination of 89%. The design can predigest the fabrication and reduce the number of components. Moreover, since the microstructures arrangement was periodical, user could use light-emitting diodes (LEDs) on the both sides. When user turned on both side LEDs, the on-axis luminance were improved 1.7 x comparing with turning on single side LEDs.
URI: http://dx.doi.org/10.1109/JDT.2013.2276744
http://hdl.handle.net/11536/23233
ISSN: 1551-319X
DOI: 10.1109/JDT.2013.2276744
期刊: JOURNAL OF DISPLAY TECHNOLOGY
Volume: 9
Issue: 12
起始頁: 965
結束頁: 971
Appears in Collections:Articles


Files in This Item:

  1. 000327502300001.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.