完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chang, Yun-Min | en_US |
dc.contributor.author | Lu, I-Te | en_US |
dc.contributor.author | Chen, Chih-Yuan | en_US |
dc.contributor.author | Hsieh, Yu-Chi | en_US |
dc.contributor.author | Wu, Pu-Wei | en_US |
dc.date.accessioned | 2014-12-08T15:34:27Z | - |
dc.date.available | 2014-12-08T15:34:27Z | - |
dc.date.issued | 2014-02-15 | en_US |
dc.identifier.issn | 0925-8388 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1016/j.jallcom.2013.10.047 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/23577 | - |
dc.description.abstract | A high-yield water-based hydrothermal synthesis was developed using silver nitrate, ammonia, glucose, and cetyltrimethylammonium bromide (CTAB) as precursors to synthesize truncated silver nanocubes with uniform sizes and in large quantities. With a fixed CTAB concentration, truncated silver nanocubes with sizes of 49.3 +/- 4.1 nm were produced when the molar ratio of glucose/silver cation was maintained at 0.1. The sample exhibited (100), (110), and (111) planes on the facets, edges, and corners, respectively. In contrast, with a slightly larger glucose/silver cation ratio of 0.35, well-defined nanocubes with sizes of 70.9 +/- 3.8 nm sizes were observed with the (100) plane on six facets. When the ratio was further increased to 1.5, excess reduction of silver cations facilitated the simultaneous formation of nanoparticles with cubic, spherical, and irregular shapes. Consistent results were obtained from transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and UV-visible absorption measurements. (C) 2013 Elsevier B. V. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | Silver nanoparticles | en_US |
dc.subject | Truncated nanocubes | en_US |
dc.subject | Hydrothermal synthesis | en_US |
dc.subject | CTAB | en_US |
dc.subject | Glucose reduction | en_US |
dc.title | High-yield water-based synthesis of truncated silver nanocubes | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1016/j.jallcom.2013.10.047 | en_US |
dc.identifier.journal | JOURNAL OF ALLOYS AND COMPOUNDS | en_US |
dc.citation.volume | 586 | en_US |
dc.citation.issue | en_US | |
dc.citation.spage | 507 | en_US |
dc.citation.epage | 511 | en_US |
dc.contributor.department | 材料科學與工程學系 | zh_TW |
dc.contributor.department | Department of Materials Science and Engineering | en_US |
dc.identifier.wosnumber | WOS:000329856800080 | - |
dc.citation.woscount | 3 | - |
顯示於類別: | 期刊論文 |