完整後設資料紀錄
DC 欄位語言
dc.contributor.authorCHANG, PHen_US
dc.contributor.authorCHEN, HMen_US
dc.contributor.authorLIU, HYen_US
dc.contributor.authorBOHLMAN, JGen_US
dc.date.accessioned2014-12-08T15:03:59Z-
dc.date.available2014-12-08T15:03:59Z-
dc.date.issued1994-05-15en_US
dc.identifier.issn0022-2461en_US
dc.identifier.urihttp://dx.doi.org/10.1007/BF00356820en_US
dc.identifier.urihttp://hdl.handle.net/11536/2491-
dc.description.abstractThe interaction of Al-1 wt% Si with a W-Ti barrier layer in the Al/Ti3W7/SiO2/Si system was studied over the temperature range of 400-500-degrees-C for reaction times up to 300 h. The interaction was found to be diffusion-controlled, and to occur in a layer-by-layer fashion. The first reaction product is always Al12W, which forms at the Al/Ti3W7 interface. With excess W in the system, Al will eventually be completely converted to Al12W, and further interactions result in the formation of an Al4W layer at the Al12W/Ti3W7 interface. The amount of Al4W increases at the expense of Al12W. Ti plays a minor role in the interaction and forms a small amount of Al3Ti precipitates in the Al12W matrix. Decomposition of the Ti3W7 pseudoalloy into W and Ti phases is not significant, and is not detected by X-ray diffraction even after annealing at 500-degrees-C for 300 h. The kinetics of the Al12W formation follows a parabolic reaction law with an activation energy of 2.53 eV. The sheet resistance of the film is insensitive to compound formation as long as a continuous Al film exists in the system. The sheet resistance increases dramatically when Al is consumed to the extent that it is no longer a continuous film. The sheet resistance of the Al12W layer is estimated to be 570 mOMEGA square-1.en_US
dc.language.isoen_USen_US
dc.titleINTERACTIONS BETWEEN AL-1 WT-PERCENT SI THIN-FILM AND W-TI BARRIER LAYERen_US
dc.typeArticleen_US
dc.identifier.doi10.1007/BF00356820en_US
dc.identifier.journalJOURNAL OF MATERIALS SCIENCEen_US
dc.citation.volume29en_US
dc.citation.issue10en_US
dc.citation.spage2697en_US
dc.citation.epage2703en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:A1994NP10100018-
dc.citation.woscount1-
顯示於類別:期刊論文