標題: | Projected Efficiency of Organic/Inorganic Hybrid Tandem Solar Cells |
作者: | Chen, Po-Han Huang, Yang-Yue Pen, Huai-Te Lai, Yi-Chun Tsai, Chia-Ying Tsai, Pei-Ting Cheng, Kai-Yuan Weng, Wei-Sheng Yu, Peichen Meng, Hsin-Fei 光電工程學系 Department of Photonics |
關鍵字: | Tandem solar cell;hybrid solar cell;organic solar cell;simulation of solar cell |
公開日期: | 2013 |
摘要: | We propose a series-connected hybrid tandem solar cell which consists of an organic solar cell (P3HT/PCBM) as the top cell and an organic/crystalline silicon hybrid solar cell (PEDOT:PSS/c-Si nanowires) as the bottom cell. Based on the device structure, the organic materials can be directly spun-cast onto the inorganic silicon substrate with thermally evaporated metal contacts, making solution-based processes possible for rapid and low-cost production. With a proper design, the hybrid device architecture can achieve a high open-circuit voltage and junction-matched photocurrent, offering a promising approach for next-generation high-efficiency photovoltaics. In this work, we established a device model to investigate the photovoltaic characteristics of the proposed hybrid tandem solar cells by combining the organic and hybrid silicon solar cells with a hypothetic recombination layer (RL). First, the model of single junction solar cells is fitted to the current-voltage curve of fabricated devices. Next, we investigate the properties of the RL between the sub-cells and observe strong correlations with the photovoltaic performance of tandem cells. In our preliminary model, we have realized a cell with an open-circuit voltage (Voc), short-circuit current (Jsc), fill-factor (FF) and power conversion efficiency (PCE) of 1.093 V, 9.715 mAkm2, 43.725 % and 4.644 %, respectively. We will further tailor the properties of the RL, the active-layer thickness of sub-cells, as well as the band alignment, in order to achieve practical device designs. Currently, the characteristics of real hybrid tandem solar cells remain significantly lower than the simulation result. The reason of such limited cell performance is the poor interfacial contact, which makes it difficult to provide efficient recombination and transport for electrons and holes generated from sub-cells. A number of challenging issues, including interface physics and device design will be discussed. |
URI: | http://hdl.handle.net/11536/25012 |
ISBN: | 978-1-4799-3299-3 |
ISSN: | 0160-8371 |
期刊: | 2013 IEEE 39TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC) |
起始頁: | 2698 |
結束頁: | 2700 |
顯示於類別: | 會議論文 |