标题: | The Butterfly-Shaped Feedback Loop in Networked Control Systems for the Unknown Delay Compensation |
作者: | Lai, Chien-Liang Hsu, Pau-Lo 电机工程学系 Department of Electrical and Computer Engineering |
关键字: | Butterfly element;delay compensation;implementation;networked control systems (NCS);network-induced delay |
公开日期: | 1-八月-2014 |
摘要: | Available model-based networked control system (NCS) design approaches are basically formulated from the known system model and the information of the networked-induced delay time. Because the delay in remote control systems is significant and time-varied as commercial networks involved, available model-based NCS design approaches may thus become impractical. The increase of time delay due to the limited communication bandwidth usually induces data dropout to make NCS design even more difficult. In this paper, the scheme of the perfect delay compensation (PDC) is proposed by introducing the butterfly-shaped inner feedback loop in NCS to deal with the unknown network-induced time delay. Furthermore, analytical results indicate that the controller obtained in general control systems can be directly implemented on NCS with the proposed PDC scheme. Both simulation and experimental results were successfully carried out on an ac servo motor at a distance of 15 km through Ethernet to maintain a stable remote control system. |
URI: | http://dx.doi.org/10.1109/TII.2014.2327911 http://hdl.handle.net/11536/25086 |
ISSN: | 1551-3203 |
DOI: | 10.1109/TII.2014.2327911 |
期刊: | IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS |
Volume: | 10 |
Issue: | 3 |
起始页: | 1746 |
结束页: | 1754 |
显示于类别: | Articles |
文件中的档案:
If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.