完整後設資料紀錄
DC 欄位語言
dc.contributor.authorLiu, Shiu-Jenen_US
dc.contributor.authorChen, Liang-Yuen_US
dc.contributor.authorLiu, Chai-Yunen_US
dc.contributor.authorFang, Hau-Weien_US
dc.contributor.authorHsieh, Jang-Hsingen_US
dc.contributor.authorJuang, Jenh-Yihen_US
dc.date.accessioned2014-12-08T15:38:05Z-
dc.date.available2014-12-08T15:38:05Z-
dc.date.issued2011-01-01en_US
dc.identifier.issn0169-4332en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.apsusc.2010.09.083en_US
dc.identifier.urihttp://hdl.handle.net/11536/26121-
dc.description.abstractElectrical, optical and magnetic properties of polycrystalline Cr-doped SnO(2) films grown on glasses using reactive dc magnetron co-sputtering technique were investigated. The Cr content was modulated by varying the sputtering power applied on the Cr target. The carrier concentration and conductivity of doped films are reduced with increasing the Cr doping. Moreover, while the Cr content ratio Cr/( Sn + Cr) exceeds 0.9 at.%, the doped SnO(2) films become insulators and the optical transmission is strongly affected. The surface roughness of sputtered films is also increased by Cr doping. The co-sputtered Cr-doped SnO(2) films exhibit paramagnetic characteristics from room temperature down to 25 K. (C) 2010 Elsevier B.V. All rights reserved.en_US
dc.language.isoen_USen_US
dc.titlePhysical properties of polycrystalline Cr-doped SnO(2) films grown on glasses using reactive dc magnetron co-sputtering techniqueen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.apsusc.2010.09.083en_US
dc.identifier.journalAPPLIED SURFACE SCIENCEen_US
dc.citation.volume257en_US
dc.citation.issue6en_US
dc.citation.spage2254en_US
dc.citation.epage2258en_US
dc.contributor.department電子物理學系zh_TW
dc.contributor.departmentDepartment of Electrophysicsen_US
顯示於類別:期刊論文