THE ROLE OF DRYING-CONTROL CHEMICAL ADDITIVES ON THE PREPARATION OF SOL-GEL DERIVED PLZT THIN-FILMS

doi:10.1007/BF00356416

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	CHANG, DA	en_US
dc.contributor.author	CHOH, YH	en_US
dc.contributor.author	HSIEH, WF	en_US
dc.contributor.author	LIN, P	en_US
dc.contributor.author	TSENG, TY	en_US
dc.date.accessioned	2014-12-08T15:04:14Z	-
dc.date.available	2014-12-08T15:04:14Z	-
dc.date.issued	1993-12-15	en_US
dc.identifier.issn	0022-2461	en_US
dc.identifier.uri	http://dx.doi.org/10.1007/BF00356416	en_US
dc.identifier.uri	http://hdl.handle.net/11536/2742	-
dc.description.abstract	Films of Pbx/100La(x)/100(Zry/100 Tiz/100)1-x/400O3 with x = 8, y = 65 and z = 35 (PLZT(8/65/35)) with a single perovskite structural phase were successfully prepared by using drying-control chemical additives in sol-gel processing followed by rapid thermal annealing at 600-degrees-C for only 1 min on Si(Pt) substrates. The roles of the drying-control chemical additives ethylene glycol and formamide in the gel preparation were studied. The hysteresis loop of PLZT(8/65/35) thin film was measured. The remanent polarization and coercive field were found to be about 1.3 muC cm-2 and 15 kV cm-1, respectively.	en_US
dc.language.iso	en_US	en_US
dc.title	THE ROLE OF DRYING-CONTROL CHEMICAL ADDITIVES ON THE PREPARATION OF SOL-GEL DERIVED PLZT THIN-FILMS	en_US
dc.type	Article	en_US
dc.identifier.doi	10.1007/BF00356416	en_US
dc.identifier.journal	JOURNAL OF MATERIALS SCIENCE	en_US
dc.citation.volume	28	en_US
dc.citation.issue	24	en_US
dc.citation.spage	6691	en_US
dc.citation.epage	6698	en_US
dc.contributor.department	工學院	zh_TW
dc.contributor.department	College of Engineering	en_US
dc.identifier.wosnumber	WOS:A1993MN41500028	-
dc.citation.woscount	20	-
顯示於類別：	期刊論文