1. 目前位置：

完整後設資料紀錄
DC 欄位值語言
dc.contributor.authorLee, IKen_US
dc.contributor.authorChou, CPen_US
dc.contributor.authorCheng, CMen_US
dc.contributor.authorKuo, ICen_US
dc.date.accessioned2014-12-08T15:41:22Z-
dc.date.available2014-12-08T15:41:22Z-
dc.date.issued2003-02-01en_US
dc.identifier.issn1059-9495en_US
dc.identifier.urihttp://dx.doi.org/10.1361/105994903770343466en_US
dc.identifier.urihttp://hdl.handle.net/11536/28137-
dc.description.abstractThe technique of forward flow forming has been used to produce a long, thin walled tube made of C-250 maraging steel. The forward flow forming can save raw material, increase strength, and reduce the production process time. Because the work hardening effect on solution-treated C-250 using flow forming is minimal, the flow-formed tube requires an additional heat treatment to obtain higher hardness and strength. With the direct aging treatment, low elongation values are obtained, making this treatment unsuitable for the engineering design. It was found that the 540 degreesC/6 h/AC over-aging treatment results in better strength and elongation values. The strengthening phase of the flow-formed C-250 maraging steel was found to be the intermetallic compound of Fe3Mo.en_US
dc.language.isoen_USen_US
dc.subjectaging treatmenten_US
dc.subjectflow-formingen_US
dc.subjectmaraging steel C-250en_US
dc.titleEffect of aging treatment on the mechanical properties of C-250 maraging steel by flow formingen_US
dc.typeArticleen_US
dc.identifier.doi10.1361/105994903770343466en_US
dc.identifier.journalJOURNAL OF MATERIALS ENGINEERING AND PERFORMANCEen_US
dc.citation.volume12en_US
dc.citation.issue1en_US
dc.citation.spage41en_US
dc.citation.epage47en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000181399700008-
dc.citation.woscount8-
顯示於類別：期刊論文


文件中的檔案：

  1. 000181399700008.pdf

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。

相關內容
Loading...