Electrical properties of metal-ferroelectric-insulator-semiconductor using sol-gel derived SrBi2Ta2O9 film and ultra-thin Si3N4 buffer layer
檔案
- 000179922500064.pdf (972.5 KB, Adobe PDF)
日期
2002-12-02
系所
期刊名稱
THIN SOLID FILMS
卷期與頁次
第 420 卷,頁 377–381
ISSN
0040-6090
語言
英文
摘要
The electrical properties of the metal-ferroelectric-insulator-silicon memories with stacked gate configuration of Pt/ SrBi2Ta2O9 (SBT)/Si3N4/p-Si (1 0 0) were investigated. In an attempt to operate at low voltage with sufficient large memory window, various ultra-thin Si3N4 buffer layers in thickness of 3.5, 2, and 0.9 nm were employed. From the results of C-V measurements, the memory window can be as large as 0.8 V at the bias amplitude of 5 V for the sample with 0.9 nm SixNy buffer layer. Well-crystallized perovskite structures have been further confirmed by the spectra of X-ray diffraction measurements. The leakage current, which plays a very important role in the data retention, of Pt/SBT (245 nm)/Si3N4 (0.9 nm)/p-Si (10 0) can be as low as 2.5 X 10(-8) A/cm(2) at 200 kV/cm. Excellent fatigue-free performance with up to 10(10) read/write cycles and good retention time of > 2 h have been obtained. Optimization and scaling of SBT thin films are believed to be effective in pursuing extremely low voltage operation, high-density and liable 1T nonvolatile ferroelectric random access memories. (C) 2002 Elsevier Science B.V. All rights reserved.
所屬典藏
會議論文引用此條目
Huang, C., Tseng, T., Chien, C., Yang, M., Leu, C., Chang, T., Liu, P., & Huang, T. (2002). Electrical properties of metal-ferroelectric-insulator-semiconductor using sol-gel derived SrBi2Ta2O9 film and ultra-thin Si3N4 buffer layer. THIN SOLID FILMS, 420, 377–381. https://doi.org/10.1016/S0040-6090(02)00939-2
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28322