完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChen, Men_US
dc.contributor.authorChen, CMen_US
dc.contributor.authorChen, CFen_US
dc.date.accessioned2014-12-08T15:41:58Z-
dc.date.available2014-12-08T15:41:58Z-
dc.date.issued2002-09-01en_US
dc.identifier.issn0022-2461en_US
dc.identifier.urihttp://dx.doi.org/10.1023/A:1016544001173en_US
dc.identifier.urihttp://hdl.handle.net/11536/28539-
dc.description.abstractVertically-aligned carbon nanotubes(CNTs) with multi-walled structure were successfully grown on a Fe-deposited Si substrate at low temperature below 330degreesC by using the microwave plasma chemical vapor deposition of methane and carbon dioxide gas mixture. This is apparently different from the conventional reaction in gas mixtures of hydrogen and methane, hydrogen and acetylene, and hydrogen and benzene ... etc. High quality carbon nanotubes were grown at lower temperature with CO2 and CH4 gas mixture than those used by the previous. After deposition, the microstructure morphology of carbon nanotubes was observed with scanning electron microscope and high-resolution transmission electron microscope. The characteristics of carbon nanotubes were analyzed by laser Raman spectroscopy. The results showed the variation of the flow rate ratio of CH4/CO2 from 28.5 sccm/30 sccm to 30/30 sccm and the DC bias voltage from -150 V to -200 V, at 300 W microwave power, 1.3-2.0 kPa range of total gas pressure, and substrate temperatures between 300degreesC and 350degreesC. Vertically aligned carbon nanotubes with the diameter of about 15 nm and multi-walled structure were illustrated by SEM and HRTEM. However, the highest yield of carbon nanotubes of about 50% was obtained at low temperature below 330degreesC by MPCVD for the CH4/CO2 gas mixture with properly controlled parameters. (C) 2002 Kluwer Academic Publishers.en_US
dc.language.isoen_USen_US
dc.titlePreparation of high yield multi-walled carbon nanotubes by microwave plasma chemical vapor deposition at low temperatureen_US
dc.typeArticleen_US
dc.identifier.doi10.1023/A:1016544001173en_US
dc.identifier.journalJOURNAL OF MATERIALS SCIENCEen_US
dc.citation.volume37en_US
dc.citation.issue17en_US
dc.citation.spage3561en_US
dc.citation.epage3567en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000177048800001-
dc.citation.woscount27-
顯示於類別:期刊論文


文件中的檔案:

  1. 000177048800001.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。