標題: OPTIMIZATION OF 2-DIMENSIONAL RADOME BORESIGHT ERROR PERFORMANCE USING SIMULATED ANNEALING TECHNIQUE
作者: HSU, F
CHANG, PR
CHAN, KK
交大名義發表
電信工程研究所
National Chiao Tung University
Institute of Communications Engineering
公開日期: 1-九月-1993
摘要: In this paper a systematic approach to radome design is presented. The problem is formulated as a global optimization procedure such that the radome performance is optimized by properly adjusting the thickness of the radome layer over the entire radome surface. In this approach the thickness profile is parameterized via B-splines representation. Simulated annealing technique is applied to finding the best thickness profile so that the maximum boresight error is reduced as small as possible over the entire range of the antenna look angle. A two-dimensional design example is given. The best possible thickness profile is found and the boresight error is reduced considerably compared to that due to a uniform layer. The method is general and can be applied without difficulty to other realistic three-dimensional radomes of arbitrary shapes.
URI: http://dx.doi.org/10.1109/8.247745
http://hdl.handle.net/11536/2865
ISSN: 0018-926X
DOI: 10.1109/8.247745
期刊: IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
Volume: 41
Issue: 9
起始頁: 1195
結束頁: 1203
顯示於類別:期刊論文


文件中的檔案:

  1. A1993ML41900003.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。