完整後設資料紀錄
DC 欄位語言
dc.contributor.authorCHEN, HDen_US
dc.contributor.authorCHANG, CYen_US
dc.contributor.authorLIN, KCen_US
dc.contributor.authorCHAN, SHen_US
dc.contributor.authorFENG, MSen_US
dc.contributor.authorCHEN, PAen_US
dc.contributor.authorWU, CCen_US
dc.contributor.authorJUANG, FYen_US
dc.date.accessioned2014-12-08T15:04:30Z-
dc.date.available2014-12-08T15:04:30Z-
dc.date.issued1993-06-01en_US
dc.identifier.issn0021-8979en_US
dc.identifier.urihttp://dx.doi.org/10.1063/1.353935en_US
dc.identifier.urihttp://hdl.handle.net/11536/2989-
dc.description.abstractHeavily carbon-doped GaAs (1 X 10(18) approximately 1 X 10(20) cm-3) grown by low-pressure metalorganic chemical vapor deposition using triethylgallium and arsine as sources and liquid carbon-tetrachloride (CCl4) as dopant has been investigated. The carrier concentration was verified at various growth temperatures, V/III ratios, and CC]4 flow rates. Dopant concentration first increased from 550-degrees-C and reached a maximum at 570-degrees-C growth temperature (T(g)) and then decreased monotonously. Carbon incorporation was strongly enhanced when the V/III ratio was less than 30 at T(g) = 590-degrees-C or less than 40 at T(g) = 630-degrees-C. Hole concentration increased and then decreased as CCl4 flow rate increased. Growth rate of layers decreased as growth temperature and flow rate Of CCl4 increased. The doping efficiency of epitaxial layers grown on the (100) substrate was higher than that on the 2-degrees off toward [110] misoriented substrate. Carbon-doped GaAs films had higher Hall mobility than zinc-doped GaAs films at high doping levels due to less self-compensation. The highest dopant concentration in this system was 2.3 X 10(20) cm-3 at T(g) = 580-degrees-C and V/III = 10.en_US
dc.language.isoen_USen_US
dc.titleCARBON INCORPORATION DURING GROWTH OF GAAS BY TEGA-ASH3 BASE LOW-PRESSURE METALORGANIC CHEMICAL-VAPOR-DEPOSITIONen_US
dc.typeArticleen_US
dc.identifier.doi10.1063/1.353935en_US
dc.identifier.journalJOURNAL OF APPLIED PHYSICSen_US
dc.citation.volume73en_US
dc.citation.issue11en_US
dc.citation.spage7851en_US
dc.citation.epage7856en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.department電控工程研究所zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.contributor.departmentInstitute of Electrical and Control Engineeringen_US
dc.identifier.wosnumberWOS:A1993LE95200122-
dc.citation.woscount9-
顯示於類別:期刊論文