Barrier capability of TaNx films deposited by different nitrogen flow rate against Cu diffusion in Cu/TaNx/n(+)-p junction diodes

檔案

日期

2001-01-01

類型

期刊名稱

SOLID-STATE ELECTRONICS

卷期與頁次

第 45 卷第 1 期,頁 149–158

ISSN

0038-1101

語言

英文

摘要

This paper investigates the barrier capability of tantalum nitride (TaNx) layers against Cu diffusion. The TaNx layers were reactively sputtered in contact holes to a thickness of 50 nm by using a different nitrogen flow rate. Results indicate that the TaNx layers fail to be a diffusion barrier due to a relative high resistivity for nitrogen flow ratios exceeding 10%. in addition, we found that the phase of alpha -Ta(-N) functions as an effective barrier against Cu diffusion and that Cu/TaN(3-5%)/n(+)-p junction diodes are able to sustain a 30 min furnace anneal up to 500 degreesC without causing degradation of the electrical characteristics. The high-temperature failure of barrier capability for the TaNx layers is due to interdiffusion of Cu and Si across the TaNx film structure to form Cu3Si. The surface roughness and the film structure of TaNx layers determine the ability of Cu and Si interdiffusion. (C) 2001 Elsevier Science Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Yang, W., Wu, W., Liu, D., Wu, C., & Ou, K. (2001). Barrier capability of TaNx films deposited by different nitrogen flow rate against Cu diffusion in Cu/TaNx/n(+)-p junction diodes. SOLID-STATE ELECTRONICS, 45(1), 149–158. https://doi.org/10.1016/S0038-1101(00)00228-8

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29926