标题: Spur gear generation by shaper cutters
作者: Tsay, CB
Liu, WY
Chen, YC
机械工程学系
Department of Mechanical Engineering
关键字: spur gear;shaper cutter;mathematical model;protuberance;undercut;optimization
公开日期: 31-八月-2000
摘要: This paper proposes the computerized tooth profile generation of spur gears cut with shaper cutters. A complete geometrical mathematical model of a spur shaper cutter is proposed, including the protuberance, the involute region and semi-topping. The profiles of standard or non-standard spur gears cut with the shaper cutter are obtained based on the theory of gearing. In addition, the effects of the cutter parameters on the generated tooth profile are investigated and illustrated with computer simulation, while the appropriate shaper cutter parameters corresponding to the required gear profile, are also determined using an optimization method. (C) 2000 Elsevier Science S.A. All rights reserved.
URI: http://dx.doi.org/10.1016/S0924-0136(00)00570-7
http://hdl.handle.net/11536/30322
ISSN: 0924-0136
DOI: 10.1016/S0924-0136(00)00570-7
期刊: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Volume: 104
Issue: 3
起始页: 271
结束页: 279
显示于类别:Articles


文件中的档案:

  1. 000089243800013.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.