標題: | Preparation of aluminum film on phosphor screen for field emission display |
作者: | Fran, YS Tseng, TY 電子工程學系及電子研究所 Department of Electronics Engineering and Institute of Electronics |
關鍵字: | phosphor screen;aluminum film;field emission display |
公開日期: | 15-十月-1999 |
摘要: | The phosphor screen for field emission display (FED) was made by using cellulose acetate butyrate as a binder dissolved in butoxyethyl acetate. Before baking at temperatures lower than 500 degrees C, the aluminum film was formed on the screen. This screen has nearly two times the brightness in comparison with pure screen. The FED panel was successfully made using Al film coated phosphor screen and demonstrated an image of high brightness and relatively good quality which is suitable for practical application. (C) 1999 Elsevier Science S.A. All rights reserved. |
URI: | http://dx.doi.org/10.1016/S0254-0584(99)00135-2 http://hdl.handle.net/11536/31029 |
ISSN: | 0254-0584 |
DOI: | 10.1016/S0254-0584(99)00135-2 |
期刊: | MATERIALS CHEMISTRY AND PHYSICS |
Volume: | 61 |
Issue: | 2 |
起始頁: | 166 |
結束頁: | 168 |
顯示於類別: | 期刊論文 |