完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Liaw, SK | en_US |
dc.contributor.author | Ho, KP | en_US |
dc.contributor.author | Lin, CL | en_US |
dc.contributor.author | Chi, S | en_US |
dc.date.accessioned | 2014-12-08T15:46:11Z | - |
dc.date.available | 2014-12-08T15:46:11Z | - |
dc.date.issued | 1999-10-01 | en_US |
dc.identifier.issn | 0030-4018 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/31060 | - |
dc.description.abstract | Two reconfigurable wavelength add/drop multiplexer (WADM) and optical cross-connect (OXC) devices based on strain-tunable fiber Bragg gratings (ST-FBGs) are proposed. The feasibility of WADM is verified by measuring the bit-error-rate performance of the dropped (cross-connect) and pass-through (no cross-connect) channels over a 50- and 100-km standard single-mode fiber for a 2.5 Gb/s system. Compared to back-to-back transmission, a negligible power penalty of only 0.2 dB is observed. (C) 1999 Published by Elsevier Science B.V. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | wavelength division multiplexing | en_US |
dc.subject | wavelength add/drop multiplexer | en_US |
dc.subject | optical cross-connect | en_US |
dc.subject | fiber Bragg grating | en_US |
dc.subject | optical network | en_US |
dc.title | Experimental investigation of wavelength-tunable WADM and OXC devices using strain-tunable fiber Bragg gratings | en_US |
dc.type | Article | en_US |
dc.identifier.journal | OPTICS COMMUNICATIONS | en_US |
dc.citation.volume | 169 | en_US |
dc.citation.issue | 1-6 | en_US |
dc.citation.spage | 75 | en_US |
dc.citation.epage | 80 | en_US |
dc.contributor.department | 光電工程學系 | zh_TW |
dc.contributor.department | Department of Photonics | en_US |
dc.identifier.wosnumber | WOS:000083095000012 | - |
dc.citation.woscount | 7 | - |
顯示於類別: | 期刊論文 |