標題: A concise method for determining a valve how coefficient of a valve under compressible gas flow
作者: Fu, WS
Ger, JS
機械工程學系
Department of Mechanical Engineering
關鍵字: valve flow coefficient;compressible flow;numerical;experimental
公開日期: 1-十二月-1998
摘要: This work presents a novel method of determining a valve flow coefficient for a valve and transient mass flow rate of compressible gas discharged from a reservoir. The proposed method consists of a set of equations to express the physical phenomena and measurement equipment to measure the indispensable data used in the above equations. Regardless of the kind of valve, the Valve flow coefficient can be obtained efficiently and feasibly. The results of this study indicate not only that the valve flow characteristics of the diaphragm valve significantly differ from those of the ball valve, but also that the C-v flow equation conventionally used is no longer valid for the diaphragm valve. The valve flow coefficient of the ball valve determined by the proposed method is about 48 and the representative one proposed by the ANSI/ISA is about 56. In addition, the mass flow rate of gas flow through a valve under transient process can be estimated without using a flow meter. Moreover, the cumulated masses discharged predicted by the method proposed herein are consistent well with those of the experimental results. The deviations are smaller than 6%. (C) 1999 Elsevier Science Inc. All rights reserved.
URI: http://dx.doi.org/10.1016/S0894-1777(98)10045-6
http://hdl.handle.net/11536/31722
ISSN: 0894-1777
DOI: 10.1016/S0894-1777(98)10045-6
期刊: EXPERIMENTAL THERMAL AND FLUID SCIENCE
Volume: 18
Issue: 4
起始頁: 307
結束頁: 313
顯示於類別:期刊論文


文件中的檔案:

  1. 000078995400005.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。