完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Tseng, YH | en_US |
dc.contributor.author | Chiou, BS | en_US |
dc.contributor.author | Peng, CC | en_US |
dc.contributor.author | Ozawa, L | en_US |
dc.date.accessioned | 2014-12-08T15:47:36Z | - |
dc.date.available | 2014-12-08T15:47:36Z | - |
dc.date.issued | 1998-09-30 | en_US |
dc.identifier.issn | 0040-6090 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/31864 | - |
dc.description.abstract | The effects of Eu on the spectral properties of Y2O2S have been investigated. The Y2O2S:Eu phosphor powders were prepared with a flux fusion method and electrophoretically deposited on an ITO-coated glass substrate to form a thin layer. Both cathodoluminescence and photoluminescence emission spectra of Y2O2S:Eu were measured. The highly intense emission lines at 616 and 626 nm are attributed to the transition from D-5(0) to F-7(2) levels. The color of Y2O2S:Eu phosphor varies from orange to red as the Eu concentration increases from Eu/ Y = 0.025 (molar ratio) to 0.06. The luminescence decay times are shorter than 1.1 ms for Eu concentrations ranging from 0.025 to 0.06 (Eu/ Y molar ratio). The luminescent color becomes redder but less bright as the Eu concentration is increased. (C) 1998 Elsevier Science S.A. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | phosphor | en_US |
dc.subject | Y2O2S : Eu | en_US |
dc.subject | luminescence | en_US |
dc.title | Spectral properties of Eu3+-activated yttrium oxysulfide red phosphor | en_US |
dc.type | Article | en_US |
dc.identifier.journal | THIN SOLID FILMS | en_US |
dc.citation.volume | 330 | en_US |
dc.citation.issue | 2 | en_US |
dc.citation.spage | 173 | en_US |
dc.citation.epage | 177 | en_US |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | 光電工程學系 | zh_TW |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department | Department of Photonics | en_US |
顯示於類別: | 期刊論文 |