Al-Cu Pattern Wafer Study on Metal Corrosion Due to Chloride Ion Contaminants
檔案
- 000283942900008.pdf (592.6 KB, Adobe PDF)
日期
2010-11-01
類型
系所
期刊名稱
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING
卷期與頁次
第 23 卷第 4 期,頁 553–558
ISSN
0894-6507
語言
英文
摘要
Chloride ions (Cl(-)) in the cleanroom environment induce metal corrosion of integrated circuits, and cause wafer scrap events. In this paper, pattern wafers were designed to monitor critical Cl(-) concentration which leads to metal corrosion effects in a simulated airborne molecular contamination (AMC) environment. The simulated Cl(-) contamination environment was established by placing different numbers of preventive maintenance (PM) wipers in wafer pods and monitored simultaneously by ion mobility spectrometer (IMS) and impinger+ion chromatography (IC) instruments. The exposed Al-Cu pattern wafers were analyzed by the KLA surface scanner and the scanning electron microscope/energy dispersive X-ray spectroscopy analyzer. The results indicate that the IMS and the impinger+IC instruments provide consistent HCl monitoring data. Furthermore, they suggest that pattern wafer exposure tests can be an effective method to monitor metal corrosion. The PM wipers are a simple and effective method to establish simulated source of HCl for studying the AMC effect in ppbv levels. The critical HCl concentration where particles could be found on the wafer surface is around 2.0-3.5 ppbv, and the critical HCl concentration that results in metal corrosion defects is around 4.1-6.4 ppbv.
關鍵詞
Airborne molecular contaminants (AMCs)chloride contaminationcleanroom microcontaminationHClpattern wafersemiconductor device所屬典藏
期刊論文引用此條目
Wu, B.-J., Bai, H., Lin, I. K., & Liu, S. S. (2010). Al-Cu Pattern Wafer Study on Metal Corrosion Due to Chloride Ion Contaminants. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 23(4), 553–558. https://doi.org/10.1109/TSM.2010.2061972
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/31961