完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Huang, Zhe-Yang | en_US |
dc.contributor.author | Huang, Che-Cheng | en_US |
dc.contributor.author | Chen, Meng-Ping | en_US |
dc.contributor.author | Hung, Yeh-Tai | en_US |
dc.date.accessioned | 2014-12-08T15:04:43Z | - |
dc.date.available | 2014-12-08T15:04:43Z | - |
dc.date.issued | 2008 | en_US |
dc.identifier.isbn | 978-1-4244-1879-4 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/3218 | - |
dc.description.abstract | A multi-stage low-noise amplifier (LNA) with LC-tank load to extend the bandwidth is designed for ultra-wideband (UWB) wireless receiver. The design consists of three LC-tank cascode amplifier and one output buffer and Is implemented in 0.18um RF CMOS process. The trade off on noise figure and chip area in low-noise amplifier design is discussed. The two LNA (LC and Res) gives 14.5dB gain; 7.2GHz and 7.0GRz 3dB bandwidth (3.1-103GHz and 3.1-10.1GHz) while consuming 22.8mW and 23.8mW through a 1.5V supply. Over the 3.1GHz - 10.3GHz and 3.1GHz-10.1GHz frequency band, a minimum noise figure of 2.6dB and 6.3dB and input return loss lower than -8.8dB and -6.8dB have been achieved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | RFIC | en_US |
dc.subject | ultra-wideband | en_US |
dc.subject | UWB | en_US |
dc.subject | LC-tank | en_US |
dc.subject | multi-stage | en_US |
dc.subject | LNA and low-noise amplifier | en_US |
dc.title | Design considerations on input impedance matching for ultra-wideband low-noise amplifier | en_US |
dc.type | Proceedings Paper | en_US |
dc.identifier.journal | 2008 INTERNATIONAL CONFERENCE ON MICROWAVE AND MILLIMETER WAVE TECHNOLOGY PROCEEDINGS, VOLS 1-4 | en_US |
dc.citation.spage | 245 | en_US |
dc.citation.epage | 248 | en_US |
dc.contributor.department | 傳播研究所 | zh_TW |
dc.contributor.department | Institute of Communication Studies | en_US |
dc.identifier.wosnumber | WOS:000257859600064 | - |
顯示於類別: | 會議論文 |