Full metadata record
DC FieldValueLanguage
dc.contributor.authorLin, YHen_US
dc.contributor.authorLee, CLen_US
dc.contributor.authorLei, TFen_US
dc.date.accessioned2014-12-08T15:01:30Z-
dc.date.available2014-12-08T15:01:30Z-
dc.date.issued1997-09-01en_US
dc.identifier.issn0018-9383en_US
dc.identifier.urihttp://dx.doi.org/10.1109/16.622599en_US
dc.identifier.urihttp://hdl.handle.net/11536/346-
dc.description.abstractA measurement method to extract the respective quantities and centroids of positive and negative trapped charges, i.e., Q(p) and Q(n), generated by the negative current stress for gate oxides is proposed and demonstrated, The method is based on neutralization of Q(p) by a low positive current stress to differentiate the effects of Q(p) and Q(n). From the extracted quantities and centroids of Q(p) and Q(n) of negatively stressed oxides, it was found that Q(p) and Q(n) are generated near the oxide/substrate interface and Q(p) is initially much larger than Q(n). After the continuous stressing, Q(p) saturates and moves closer to the interface, but Q(n) keeps increasing and moves away from the interface, especially for those oxides after the post-poly anneal (PPA) treatment, Q(n) is very unstable and easily neutralized, either by a small stress of opposite polarity or the same polarity, For the latter, Q(n) is mainly dependent on the level of the final stressing field.en_US
dc.language.isoen_USen_US
dc.titleMonitoring trapped charge generation for gate oxide under stressen_US
dc.typeArticleen_US
dc.identifier.doi10.1109/16.622599en_US
dc.identifier.journalIEEE TRANSACTIONS ON ELECTRON DEVICESen_US
dc.citation.volume44en_US
dc.citation.issue9en_US
dc.citation.spage1441en_US
dc.citation.epage1446en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
Appears in Collections:Articles


Files in This Item:

  1. A1997XR10800013.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.