完整後設資料紀錄
DC 欄位語言
dc.contributor.author何盈杰en_US
dc.contributor.authorHo, Yingchiehen_US
dc.contributor.author蘇朝琴en_US
dc.contributor.authorSu, Chauchinen_US
dc.date.accessioned2015-11-26T01:07:06Z-
dc.date.available2015-11-26T01:07:06Z-
dc.date.issued2012en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT079412805en_US
dc.identifier.urihttp://hdl.handle.net/11536/40731-
dc.description.abstract近年來,「環保綠能、永續生存」是近年來各界發展的重點。對電子產品而言,電池是能量的主要來源,延長電池的壽命可減少電池的消耗;另一方面,使用低功率設計,讓電路能降低功率消耗並延長電池的壽命。根據 P = fCV2 的理論中,同時降低操作電壓、減少電容負載的多重作用下,使得動態功率可達到好幾個羃次方 (Order) 的下降。為了達到低功率的效果,降低操作電壓是最直覺又有效的方法。甚至,有許多研究是將電路操作在近臨界區(Near-threshold)附近或直接在次臨界區裡操作。奈米技術已經廣泛地運用在低功耗的應用上,包括RF、Analog、AD/DA、與MPU等,功率更低的還有生理信號檢測的相關設計。充分利用奈米技術中元件負載減小的特性,以及次臨界區電流的極限。 然而近臨界電路的設計將元件操作在近臨界區,目的是大幅降低功耗,達到所謂的效率能源(Energy-efficient)的特色。但是它有幾個主要的瓶頸:第一、操作速度慢,多應用於生醫晶片或其它慢速的系統。第二、靜態漏電功率消耗的問題在近臨界區下更顯得嚴重。第三、嚴重的製程漂移,影響著良率與量產成本。 在本論文裡,我們提出了近臨界電壓系統單晶片(System on Chip, SoC)上的資料傳輸(Data link)電路設計。並提出一系列全新的靴帶式技術(Bootstrap technique),解決近臨界區電路設計的問題。我們提出的靴帶式技術,主要概念是使電路可提供雙向的升壓功能,所謂的雙向,是同時對P型跟N型元件作用,一邊大幅地增加驅動力,一邊抑制靜態漏電。相較於傳統電路操作在近臨界區,可以有兩個order的改善。另一個的優點就是靴帶式技術可以使在次臨界區操作電壓下的電路,操作在一般的三極管區 (Triode region),使得電路模型更加精確。我們從電路的蒙地卡羅分析就可以清楚地了解到製程漂移因此大幅減少。 我們一共呈現了四個相關的電路:(1)一個應用於時脈網路(clock network)裡,可主動減少漏電流之靴帶式反相器。操作在0.2V時,即便是1cm晶片上連線的時脈樹,能提供10MHz的穩定時脈,能加以抑制低電壓操作時嚴重的靜態漏電流。此外,本設計使用閘極升壓(Gate Boosting)的概念,使大部分元件操作在導通區,大幅降低製程漂移。(2)一個應用在晶片匯流排(on-chip bus)上,能有效抑制符號干擾(Inter-Symbol Interference, ISI)的靴帶式中繼器設計,VDD = 0.3V時,單一個channel最高可以傳輸100Mbps的資料傳輸率 (使用210-1 PRBS),即便在VDD = 0.1V時,仍有0.8Mbps的資料傳輸率。(3)接著,我們尋求最佳的有效能源設計,提出的高倍升壓的中繼器,提供三倍與四倍升壓功能之預驅動器(Pre-driver)來提供最佳的有效能源設計,而不會犧牲操作速度。我們應用在晶片匯流排中的中繼器,僅使用VDD = 0.15V的操作電壓,最高可達到5Mbps的資料傳輸率,每位元的能源消耗僅有35.2fJ。(4)最後,我們提出了靴帶式振盪器(bootstrapped ring oscillator),並完成了一個可操作在近臨界電壓的全數位鎖位迴路(All-digital PLL, ADPLL)。操作在0.5V時,這個ADPLL可提供480MHz的輸出頻率,僅有78μW的功率消耗,而在0.25V時,仍可提供44.8MHz輸出頻率,消耗2.4μW的功率。zh_TW
dc.description.abstractFor the sustainable electronic devices, ultra-low power design is essential to prolong the battery lives. According to P = fCV2, scaling the supply voltage down is the most effective way to reduce the power consumption. According to the forecast from the International Technology Roadmap for Semiconductors (ITRS), the supply voltage will be scaled to 0.5V for low-power applications within the next generation. Scaling the supply voltage near the threshold voltage is the most favorable solution for low-power designs. On the other hand, Nano-scaled devices exceed the limit of the speed in the near-threshold region based on small device loading. Nano-scaled process is broadly applied to ultra-low power designs, which includes RF, AD/DA, MPU, especially in biomedical applications. Emerging embedded biomedical applications have once more pushed the low-power designs into another extreme case. In order to achieve the feature of the energy-efficient operation, the designs are applied to work using near-threshold supply. However, near-threshold circuit design is definitely challenging because the driving capability (Ion), which is limited to apply to slow system. Then, the static leakage power becomes severe, and decreases the Ion/Ioff ratio. Moreover, process variations are degraded significantly, affecting the circuit performance, the power efficiency, and the fabrication yield. In this dissertation, we propose circuit designs on-chip data link system using near-threshold supply. In order to improve the design issues in the near-threshold region, we have developed several bootstrapped circuits. The main contribution of the proposed bootstrapped techniques is to boost the gate voltage at the both sides, which means to boost the gate voltage of the PMOS and NMOS at the same time. The proposed circuit is applicable in both increasing driving ability by boosting signals into super-threshold region and reducing the leakage current. While the circuit is operated in sub-threshold region, two-order improvement is achieved. In addition, the bootstrapped circuits are operated in triode region with the near-threshold supply. Consequently, that explain why the process variation affects the proposed design scheme to a lesser extent. We can verify it with simulations of Monte Carlo analysis. Four build blocks using bootstrapped circuits in on-chip data link have been proposed. The first one is a bootstrapped CMOS inverter applied to on-chip clock network. In addition to improving the driving ability, a large gate voltage swing from -VDD to 2VDD suppresses the sub-threshold leakage current. The test chip is able to achieve 10MHz operation under 200mV VDD; the power consumption is 1.01μW. The Monte Carlo analysis results indicate that a sigma of delay time is only 2.9ns at 0.2V operation. Then, an ISI-suppressed bootstrapped repeater applied to on-chip bus is proposed. The bootstrapped CMOS repeaters are inserted to drive a 10mm on-chip bus. Additionally, a precharge enhancement scheme increases the speed of the data transmission, and a leakage current reduction technique suppresses ISI jitter. The measured results demonstrate that for a 10-mm on-chip bus, it can achieve 100Mbps data rate at 0.3V, and even 0.8 Mbps at 0.1V. The third section investigates the performance of the interconnects with repeater insertion in the sub-threshold region. A 3X CMOS pre-driver and a 4X one are proposed to enhance the driving capability. As compared to the conventional repeater, the proposed ones have higher energy efficiency. The measured results show that the 3X (4X) pre-drivers can achieve 5Mbps (1.5Mbps) data rate at 0.15V with an efficiency of 35.2fJ (32.8fJ). The last section, we present a near-threshold supply ADPLL with bootstrapped digitally-controlled ring oscillator (BDCO) that allows an ADPLL to operate with a near-threshold supply. The BDCO is composed of a bootstrapped ring oscillator (BTRO) and a weighted thermometer-controlled resistance network (WTRN). The proposed bootstrapped delay cell generates large gate voltage swing to improve the driving capability significantly. The boosted output swing keeps the transistors operated in the linear region to provide high linearity of the output frequency as function of VDD even using a near-threshold supply. According to the transferring character of the BTRO, WTRN provides linear control while sweeping the supply voltage. The proposed ADPLL oscillates from 36.8 to 480MHz with a power consumption of 2.4-78μW under a supply voltage of 0.25-0.5V.en_US
dc.language.isoen_USen_US
dc.subject低電壓zh_TW
dc.subject低功率zh_TW
dc.subject次臨電壓zh_TW
dc.subject拔靴帶式電路zh_TW
dc.subjectLow voltageen_US
dc.subjectLow poweren_US
dc.subjectSubthresholden_US
dc.subjectBootstrapped circuitsen_US
dc.title應用於近臨界電壓晶片資料傳輸之拔靴帶式電路技術zh_TW
dc.titleBootstrapped Circuit Techniques for Near-Subthreshold On-chip Data Link.en_US
dc.typeThesisen_US
dc.contributor.department電控工程研究所zh_TW
顯示於類別:畢業論文


文件中的檔案:

  1. 280501.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。