Cross-coupled precompensation method for the contouring accuracy of computer numerically controlled machine tools

完整後設資料紀錄

DC 欄位	值	語言
dc.contributor.author	Chin, JH	en_US
dc.contributor.author	Lin, TC	en_US
dc.date.accessioned	2014-12-08T15:01:38Z	-
dc.date.available	2014-12-08T15:01:38Z	-
dc.date.issued	1997-07-01	en_US
dc.identifier.issn	0890-6955	en_US
dc.identifier.uri	http://hdl.handle.net/11536/455	-
dc.description.abstract	A cross-coupled precompensation method (CCPM) for precise trajectories of machine tools is proposed in this study. Compared with the conventional cross-coupled system and uncoupled system by computer simulation and experiment, the pure precompensation method is better in dealing with the circular trajectory and the elimination of the steady-state errors, while the CCPM can achieve the most precise tracking for both linear and circular trajectory at any feedrate. The advantages of CCPM will be enhanced at higher feedrates. At a feedrate of 200 mm/sec the CCPM stands out significantly. (C) 1997 Elsevier Science Ltd.	en_US
dc.language.iso	en_US	en_US
dc.title	Cross-coupled precompensation method for the contouring accuracy of computer numerically controlled machine tools	en_US
dc.type	Article	en_US
dc.identifier.journal	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE	en_US
dc.citation.volume	37	en_US
dc.citation.issue	7	en_US
dc.citation.spage	947	en_US
dc.citation.epage	967	en_US
dc.contributor.department	交大名義發表	zh_TW
dc.contributor.department	機械工程學系	zh_TW
dc.contributor.department	National Chiao Tung University	en_US
dc.contributor.department	Department of Mechanical Engineering	en_US
顯示於類別：	期刊論文

文件中的檔案：

A1997XF14000005.pdf

若為 zip 檔案，請下載檔案解壓縮後，用瀏覽器開啟資料夾中的 index.html 瀏覽全文。