深孔鑽削刀桿行為之研究

Full metadata record

DC Field	Value	Language
dc.contributor.author	謝啟迪	en_US
dc.contributor.author	Xie, Qi-Di	en_US
dc.contributor.author	秦繼華	en_US
dc.contributor.author	Qin, Ji-Hua	en_US
dc.date.accessioned	2014-12-12T02:10:05Z	-
dc.date.available	2014-12-12T02:10:05Z	-
dc.date.issued	1991	en_US
dc.identifier.uri	http://140.113.39.130/cdrfb3/record/nctu/#NT804489004	en_US
dc.identifier.uri	http://hdl.handle.net/11536/56499	-
dc.description.abstract	摘要在鑽孔切削中，深孔鑽削能夠鑽深度一直徑比超過100 刀桿的品質的深孔。因為刀桿很長，刀桿的弱剛性和由刀桿振動引起的撓曲影響會降低刀頭的鑽削性質。本文建立對深孔鑽削的一般動態方程式和研究深孔鑽削刀具的刀桿行為。使用運送流體的管子理論和包含彎曲、扭轉的Bernoulli-Eulerian理論來研究側向、縱向和扭轉振動的刀查行為。此行為與流體流動的效果和結構的動態特性有關係。	zh_TW
dc.language.iso	zh_TW	en_US
dc.subject	深孔鑽	zh_TW
dc.subject	削刀桿	zh_TW
dc.subject	行為研究	zh_TW
dc.subject	機械工程	zh_TW
dc.subject	工程	zh_TW
dc.subject	MECHANICAL-ENGINEERING	en_US
dc.subject	ENGINEERING	en_US
dc.title	深孔鑽削刀桿行為之研究	zh_TW
dc.title	The shaft behavior of deep hole drilling tool	en_US
dc.type	Thesis	en_US
dc.contributor.department	機械工程學系	zh_TW
Appears in Collections:	Thesis