完整後設資料紀錄
DC 欄位語言
dc.contributor.author李繁中en_US
dc.contributor.authorLi, Fan-Chungen_US
dc.contributor.author郭仁財en_US
dc.contributor.authorJen-Tsai Kuoen_US
dc.date.accessioned2014-12-12T02:17:49Z-
dc.date.available2014-12-12T02:17:49Z-
dc.date.issued1996en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#NT850436067en_US
dc.identifier.urihttp://hdl.handle.net/11536/62147-
dc.description.abstract在本論文中,我們提出了一個設計與合成非均勻雙重或三重耦合微帶 線的方法,此方法是源自一用於單一非均勻微帶線的電子長度匹配程序.因 為我們所考慮的系統性能是散射參數S11的頻寬和漣波波峰,所以柴比雪夫 響應被用作為設計時的初始響應.利用非均勻雙重或三重耦合微帶線的電 子匹配程序,可合成出較小的反射係數.反射係數的漣波波峰降低和頻寬增 加是不可能同時達成的,因此二者之間必然要有折衷存在.設計者可依據系 統的需求調整參數如各模態下的漣波波峰和截止角頻率使系統的性能達到 預期的要求. In the thesis, we present a method for the design and synthesis of double and triple coupled nonuniform microstrip lines. The method is originated from an electrical lengthmatched procedure for single nonuniform microstrip line. The system performances we considered are bandwidth and ripple peak of scattering parameter S11, so the Tchebtcheffresponse is adopted as the initial response for our design. Using the electrical lengthmatched procedure double or triple coupled nonuniform microstrip lines with smaller reflection can be synthesized. The reduction of ripple peak and the increase of bandwidthare impossible to obtain at the mean time and there must be a tradeoff between them.According to the system demands, the designer may adjust the parameters such as tolerable reflection coefficient and cutoff angular frequency for each mode so that desired performance can be achieved.zh_TW
dc.language.isozh_TWen_US
dc.subject非均勻耦合微帶線zh_TW
dc.subject電子長度匹配程序zh_TW
dc.subject柴比雪夫響應zh_TW
dc.subjectNonuniform coupled microstrip linesen_US
dc.subjectElectric length matched procedureen_US
dc.subjectTchebycheff responseen_US
dc.title非均勻耦合微帶線之設計與合成zh_TW
dc.titleThe Design and Synthesis of Nonuniform Coupled Microstrip Linesen_US
dc.typeThesisen_US
dc.contributor.department電信工程研究所zh_TW
顯示於類別:畢業論文